Dear i1w5d7gf38keg,
Am Sonntag, den 26.02.2017, 21:23 +0100 schrieb i1w5d7gf38keg@tutanota.com:
Hardware: g41m-es2l, latest coreboot git, latest seabios git, native vga, ps2 keyboard + usb keyboard
Please always add the commit hashes to your reports, as reading the mailing list archive [1] in the future, “latest” is harder to map to a specific commit.
I liked to try out coreinfo. It show the CPU Information page at start. When i then press any button (f1,f2,a,b,c,d) nothing happens. I also cant reboot by pressing ctrl+alt+del. Have to press the ATX- power-on/off-button.
I then shut down and connected a USB-Keyboard. I pressed in Seabios esc (usb keyboard is working) and then inside coreinfo i was again unable to get any functionality by pressing some button.
The payload *coreinfo* works with QEMU for me, so I guess it’s an issue with the board. Please verify, if there are any differences if you use the payload *coreinfo* directly. (The problem will probably be the same.)
Then please try the same payload files/setup (SeaBIOS, coreinfo) with a coreboot image built for QEMU.
If it works for you there, the reason is probably incomplete support for your device. Please provide debug logs. Remember, that this is one of the main advantages of coreboot, that you get elaborate messages.
Though, I have no idea, if somebody will have time and motivation to fix this. So you might have to fix this yourself.
To not forget about this, and document this issue, it’d be great if you created an issue in the coreboot bug tracker [2], and attach your config files and captured log messages there.
Thanks,
Paul
PS: It’d be great, if you just send plain text messages with no HTML parts to mailing lists.
[1] https://www.coreboot.org/pipermail/coreboot/2017-February/083418.html [2] https://ticket.coreboot.org/