* Klaus Stammermann klaus123@ibnoetzold.de [080303 15:20]:
Hi there
I have some trouble to use coreboot on my VIA EPIA-ME6000 so I hope someone could give me some hints.
With epia-m and filo I can build a bios without vga. This runs till jumping to kernel. This breaks up with an error: Loading kernel... ok "Jumping to entry point... 0
Was the kernel built with serial console support? Was console=ttyS0,... specified as a command line option to the kernel?
And using VGA-support with onboard device I get this message: "DO THE VGA BIOS found VGA: vid=1106, did=3122 rom base, size: fffc0000 BAD SIGNATURE 0x7f 0x45 Unexpected Exception: 13 @ 10:000130fe - Halting Code: 0 eflags: 00010006 eax: 00000000 ebx: 000247d4 ecx: 80010030 edx: 00000cfc edi: 0001a4b0 esi: 000247d4 ebp: 00023f8c esp: 00023f6c"
What do I have to do to boot with a VGA-card? Are there any options which have to be set?
I think you need a special version of the vga option rom. Have you used the one from the optionroms repo? http://www.coreboot.org/viewvc/trunk/optionroms/?root=optionroms
Stefan