Hi Naveen, Do you have the ANY_TOOLCHAIN option enabled? It's under General setup --> Allow building with any toolchain.
Make sure that option is not selected if you want to use coreboot's crossgcc toolchain.
On Sat, Oct 19, 2019 at 12:08 PM Naveen Chaudhary < NaveenChaudhary2010@hotmail.com> wrote:
As per the Wiki : https://www.coreboot.org/Build_HOWTO I did "make crossgcc-i386". Now when I do make, I get compilation errors because my host gcc verion is 4.3. In case I update the host gcc version is updated to some later version, says gcc-8 , the errors are gone.
Looks like coreboot build system still uses the host gcc. How can I make with coreboot toolchain, instead of the host gcc toolchain.
Regards, Naveen Build HOWTO - coreboot https://www.coreboot.org/Build_HOWTO This page describes how you can build a coreboot image for your specific mainboard. www.coreboot.org
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org