Re: [LinuxBIOS] #87: flashrom issues on m57sli-s4

[Corey Osgood]

Torsten Duwe wrote:
> On Saturday 10 November 2007 00:48, Carl-Daniel Hailfinger wrote:
> > Hi Ward,
> >
> > On 08.11.2007 16:51, Carl-Daniel Hailfinger wrote:
> > > On 08.11.2007 16:22, Ward Vandewege wrote:
> > > > On Thu, Nov 08, 2007 at 02:05:16PM -0000, LinuxBIOS wrote:
> > > > > #87: flashrom issues on m57sli-s4
> > > > >
> > > > > I need superiotool output for a board with parallel flash running
> > > > > under LB. NOW.
> > > >
> > > > LinuxBIOS:          http://ward.vandewege.net/superiotool-lb.m57sli.dump
> > > > Proprietary BIOS:  
> > > > http://ward.vandewege.net/superiotool-prop.m57sli.dump
> >
> > Can you retest with the following patch applied? Thanks.
> > > The "wtf?!?" comment is intentional and designates another bug. However,
> > > I have no idea which device number we need here.
> >
> > Regards,
> > Carl-Daniel
> >
> > Try to fix a few loose ends on the GA-M57SLI Super I/O GPIO configuration.
> >
> > Signed-off-by: Carl-Daniel Hailfinger
>
> Flash erase on my board was failing reliably. Now it works!
> Acked-by: Torsten Duwe
> > Index: LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Config.lb
> >
> > --- LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Config.lb	(Revision 2953)
> > +++ LinuxBIOSv2/src/mainboard/gigabyte/m57sli/Config.lb	(Arbeitskopie)
> > @@ -239,7 +239,9 @@
> >    				device pci 0.0 on end   # HT
> >                  			device pci 1.0 on # LPC
> >    					chip superio/ite/it8716f
> > 					device pnp 2e.0 off #  Floppy
> > 					device pnp 2e.0 off #  Floppy and anyLDN
> > 						irq 0x23 = 0x11 # watchdog from CLKIN, CLKIN = 24 MHz
> > 						#0x24 = 0x1a # serial flash (SPI only)
> >         	                 			io 0x60 = 0x3f0
> >         	                			irq 0x70 = 6
> >         	                			drq 0x74 = 2
> >
> > @@ -269,6 +271,30 @@
> >                  	        			device pnp 2e.6 on #  Mouse
> >                  	                			irq 0x70 = 12
> >    						end
> >            	        			device pnp 2e.7 on #  GPIO, SPI flash
> > 						irq 0x25 = 0x0 # pin 84 is not GP10
> > 						irq 0x26 = 0x43 # pin 21 is GP26, pin 26 is GP21, pin 27 is GP20
> > 						irq 0x27 = 0x20 # pin 13 is GP35
> > 						#0x28 = 0x0 # pin 70 is not GP46
> > 						irq 0x29 = 0x81 # pin 6,3,128,127,126 is GP63,64,65,66,67
> > 						#0x2c = 0x1f # Enable FAN_CTL/FAN_TAC set to 5 (pin 21,23), enable
> >
> > FAN_CTL/FAN_TAC set to 4 (pin 20,22), pin 48 is PCIRST5#, pin91 is
> > PCIRSTIN#, VIN7 is internal voltage divider for VCCH5V, pin 95 is ATXPG,
> > VIN3 is internal voltage divider for VCC5V +								io 0x62 = 0x800 #
> > simple i/o base
> >            	                			#io 0x64 = 0x820 # serial flash io
> >
> > (SPI only) +								#0x71 = 0x1 # watch dog force timeout (parallel flash
> > only) +								irq 0x72 = 0x0 # no WDT interrupt
> > 						irq 0xb8 = 0x0 # GPIO pin set 1 disable internal pullup
> > 						irq 0xbc = 0x01 # GPIO pin set 5 enable internal pullup
> > 						#0xc0 = 0x0 # SIO pin set 1 alternate function
> > 						irq 0xc1 = 0x43 # SIO pin set 2 mixed function
> > 						irq 0xc2 = 0x20 # SIO pin set 3 mixed function
> > 						#0xc3 = 0x0 # SIO pin set 4 alternate function
> > 						#0xc8 = 0x0 # SIO pin set 1 input mode
> > 						irq 0xc9 = 0x0 # SIO pin set 2 mixed input/output mode
> > 						#0xcb = 0x0 # SIO pin set 4 input mode
> > 						#0xf0 = 0x10 # generate SMI# on EC IRQ
> > 						#0xf1 = 0x40 # SMI# level trigger
> > 						irq 0xf6 = 0x28 # HWMON alert beep pin location
> > 					end
> >         	        			device pnp 2e.8 off #  MIDI
> > 					io 0x60 = 0x300
> > 					irq 0x70 = 10
> >
> > @@ -305,6 +331,7 @@
> >                                                          device i2c 57 on
> > end end
> >    				end # SM
> > +#wtf?!? we already have device pci 1.1 in the section above
> >                                          device pci 1.1 on # SM 1
> >  #PCI device smbus address will depend on addon pci device, do we need to
> > scan_smbus_bus? #                                                chip
> > drivers/generic/generic #PCIXA Slot1

r2954, with a desperate attempt at trying to fit comments into 80 char
lines. Thanks!

-Corey