On Sat, 25 Jan 2003 23:55:56 -0700 (MST), Ronald G. Minnich wrote:
richard, here is a known-good config file for the digital logic smartcore-p3, a known-good platform. Just try building with this and see how the errors work out :-)
Not good... I get nothing. It built though so I guess thats a step up.
Also what mainboard are you using?
The Bitworks IMS board. Its a custom board we designed. Looks really close to the Intel reference design for the 440bx. We are using a NSC pc87351 for the superio. I added that into the p3 config instead of the SMC but no luck.
With out SERIAL_POST=1 my config generates output but the ramtest fails. So I'm going to start looking at the differences between the p3 and my IMS config. Perhaps something will show up.
-- Richard A. Smith Bitworks, Inc. rsmith@bitworks.com 479.846.5777 x104 Sr. Design Engineer http://www.bitworks.com