Re: [coreboot] questions about Rangerley

Hi Martin,

I am kinda have this graphic card issue when porting coreboot to this MohonPeak CRB, would you please advice any of the supported graphic card? or is there any clue or document about how to support such graphic card with seaBios?

thanks

May

From: Martin Roth
Date: 2014-12-05 12:00
To: Jack Zhao; coreboot
Subject: Re: [coreboot] questions about Rangerley
Hi Jack,
   The Rangeley processor is supported by coreboot.  The intel/mohonpeak 
is the reference board.

You will need to download the FSP from http://intel.com/fsp

While there isn't a platform guide for rangeley yet, you would follow 
similar steps to setting up coreboot for the baytrail platform, so grab 
that platform guide from the fsp site.  I believe it should answer most 
of your questions.

Please note that the graphics card delivered with the mohon peak board 
is NOT compatible with SeaBIOS.  This is an issue with the video bios on 
that particular graphics card.

Also, if this is for a commercial project, you may be interested in 
Sage's Rangeley BSP. 
http://www.se-eng.com/intel-processors-formerly-known-as-rangeleyavoton/

Martin

On 12/04/2014 01:07 AM, Jack Zhao wrote:
> Hi Mr. Coreboot J
>
> I am a software engineer. And I am studying the coreboot with a new 
> project which will use the CPU Intel Rangerley. But from the supported 
> list, I cannot find it. Could you please tell me how I can see that? 
> Or you can share with me some link about it. Thanks very much for 
> support in advance.
>
> Best Regards,
>
> Jack Zhao
>
> [phone]-81122