[coreboot] Re: FSP 1.0: How to configure soldered memory with spd

[Nico Huber]

Hello Alexey,

On 02.05.19 22:22, Alexey Borovikov wrote:
> If I understand correctly, when setting up a FSP with memory down, FSP
> does not read the SPD, but waits for the setting as a function parameter.
> If I set memory as DIMM in the FSP, then the FSP will read the SPD from
> the specified SMBUS address (A0, A2).
> I'm right?

yes, I would expect that. But documentation is thin and I've no
experience with the BayTrail FSP in particular.

Nico