Garrett, I have seen this before. Details are probably in the coreboot list logs somewhere. It basically would freeze on reboot and then after about 20s reset it self. I have bypassed the issue without actually fixing it but forcing a CPU reset on reboot.
PS: I had disabled it to ensure that bios chip was not written to, so we can now do a verify on the whole chip. Hope this helps. Naveed
From: coreboot [mailto:coreboot-bounces@coreboot.org] On Behalf Of GARRETT DOORENBOS Sent: Tuesday, 12 December 2017 1:17 AM To: coreboot@coreboot.org Subject: [coreboot] Can't disable CONFIG_ENABLE_FSP_FAST_BOOT flag on Intel Baytrail platform
Hello,
I'm running coreboot on an Intel Atom Bay Trail based platform. When I turn off the CONFIG_ENABLE_FSP_FAST_BOOT flag, I get stuck in the Intel FSP (it never returns) after a warm boot. The only way around it is a power cycle. Has anyone seen this before?
Thanks, Garrett Doorenbos Software Engineer - Almost Hardware
Office: 256.963.6369 Email: garrett.doorenbos@adtran.commailto:garrett.doorenbos@adtran.com Web: www.adtran.comhttps://linkprotect.cudasvc.com/url?a=http://s.bl-1.com/h/CoY1mz9%3furl%3dhttp://www.adtran.com&c=E,1,2DSyxCwqxEyuAYzWqoL_8XrwwRvZGOfu7A9Ne0BEZTcWSRd9hjAVRj_oJEqZSjjv4vZxRfPxuDX7ILYejOVyBkMJoASQy3DQIIMw9dgQ6C_AzJib990,&typo=1
ADTRAN 901 Explorer Boulevard Huntsville, AL 35806 - USA
