That's what I was thinking Peter, I'll have to look into this further. Just think, this will be the first coreboot board with TV-out that will not depend on any outside drivers :-)
Although there are Linux drivers that could be used to change the settings once in Linux (overscan, etc).
Thanks, Joseph Smith Set-Top-Linux www.settoplinux.org
-----Original Message----- From: coreboot-bounces@coreboot.org [mailto:coreboot-bounces@coreboot.org] On Behalf Of Peter Stuge Sent: Saturday, April 19, 2008 1:42 PM To: Coreboot Subject: Re: [coreboot] TV-Out Plan - need suggestions
On Fri, Apr 18, 2008 at 05:50:15PM -0400, Corey Osgood wrote:
- Then setup a init (that would program the registers, and fire
it up for the Tv encoder coreboot-v2/src/drivers/tv-out which could also be called from the nothbridge vga.c.
Again, do this inside mainboard.c, so any other systems that might use i830 don't get tv init interfering with anything else.
Please make the TV stuff generic code for the chipset that is enabled by an option in Config.lb.
//Peter
-- coreboot mailing list coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot