Quoting ron minnich rminnich@gmail.com:
On Tue, Mar 11, 2008 at 4:42 PM, joe@smittys.pointclark.net wrote:
Quoting ron minnich rminnich@gmail.com:
i.e. did you just try all the other mods without doing this? I realize 2.0 is on its way out in the next year, but having to modify this file says something is very, very wrong.
Not quite sure what you mean? If your not going to use VGA you should comment the rom stuff right? I tried something like:
you should never need to change Config.lb files in the src/ tree. If you do, they are incorrectly set up. Or there is a bug in the config/build system -- I won't rule that out either :-)
if CONFIG_VIDEO_MB
chip drivers/pci/onboard # Onboard VGA device pci 2.0 on end # VGA (Intel 82830 CGC) register "rom_address" = "0xfff00000" endelse
device pci 2.0 on end # VGA (Intel 82830 CGC)end
But I kept getting build errors. Is it ok to leave the rom stuff with no VGA?
Yes, probably. the setting will be ignored since there is nothing there to look at it.
I think you can just leave it all unchanged and build the bios. If you don't mind, I'd appreciate it if you could try it.
Ok, I will try and report back, then update the wiki page.
Thanks - Joe