Eric,
There is one hardcode in src/northbridge/amd/amdk8/northbridge.c to change the value of 0xBC to 0x00ffff00, so the link2 to cpu0 is changed back to link0 again.
I changed the hard code to "|" instead of direct assignment.
But it hung after get the Ethernet mac address.
Any idea?
Regards
YH.
Etherboot 5.2.0 (GPL) http://etherboot.org Tagged ELF for [TG3] Relocating _text from: [00025a60,00065df0) to [efebfc70,eff00000) Probing pci nic... 00:01.00 [1022/7450] 00:01.01 [1022/7451] 00:02.00 [1022/7450] 00:02.01 [1022/7451] 00:03.00 [1022/7460] 00:04.00 [1022/7468] 00:04.01 [1022/7469] 00:04.02 [1022/746A] 00:04.03 [1022/746B] 00:04.05 [1022/746D] 00:18.00 [1022/1100] 00:18.01 [1022/1101] 00:18.02 [1022/1102] 00:18.03 [1022/1103] 00:19.00 [1022/1100] 00:19.01 [1022/1101] 00:19.02 [1022/1102] 00:19.03 [1022/1103] 01:09.00 [14E4/16A7] [tg3-5703X]The PCI BIOS has not enabled this device! Updating PCI command 0002->0007. pci_bus 01 pci_device_fn 48 Capability: 7 Capability: 1 err=0 Ethernet addr: 00:E0:81:F0:19:63 Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit)