Author: uwe Date: 2009-05-19 00:27:53 +0200 (Tue, 19 May 2009) New Revision: 534
Modified: trunk/board_enable.c Log: Add detection support and write-enable for the GIGABYTE GA-MA78GM-S2H. Thanks Michael Heimann for reporting.
The board was misidentified as a GIGABYTE GA-MA78G-DS3H though, as the old PCI IDs and subsystem IDs of match. Thus, use differing ones for both boards, which is not so easy. The only usable-looking difference is in the SATA controller subsystem IDs. This should allow us to properly detect both boards.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Uwe Hermann uwe@hermann-uwe.de
Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-05-18 21:56:16 UTC (rev 533) +++ trunk/board_enable.c 2009-05-18 22:27:53 UTC (rev 534) @@ -679,7 +679,8 @@ {0x1106, 0x3227, 0x1458, 0x5001, 0x10ec, 0x8139, 0x1458, 0xe000, NULL, NULL, "GIGABYTE", "GA-7VT600", board_biostar_p4m80_m4}, {0x10de, 0x0360, 0, 0, 0, 0, 0, 0, "gigabyte", "m57sli", "GIGABYTE", "GA-M57SLI-S4", it87xx_probe_spi_flash}, {0x10de, 0x03e0, 0, 0, 0, 0, 0, 0, "gigabyte", "m61p", "GIGABYTE", "GA-M61P-S3", it87xx_probe_spi_flash}, - {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4385, 0x1458, 0x4385, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash}, + {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb000, NULL, NULL, "GIGABYTE", "GA-MA78G-DS3H", it87xx_probe_spi_flash}, + {0x1002, 0x4398, 0x1458, 0x5004, 0x1002, 0x4391, 0x1458, 0xb002, NULL, NULL, "GIGABYTE", "GA-MA78GM-S2H", it87xx_probe_spi_flash}, /* SB600 LPC, RD790 North. Neither are specific to the GA-MA790FX-DQ6. The coreboot ID is here to be able to trigger the board enable more easily. */ {0x1002, 0x438d, 0x1458, 0x5001, 0x1002, 0x5956, 0x1002, 0x5956, "gigabyte", "ma790fx-dq6", "GIGABYTE", "GA-MA790FX-DQ6", it87xx_probe_spi_flash}, {0x1166, 0x0223, 0x103c, 0x320d, 0x102b, 0x0522, 0x103c, 0x31fa, "hp", "dl145_g3", "HP", "DL145 G3", board_hp_dl145_g3_enable},