Issue #581 has been updated by Keith Hui.
Patch up: https://review.coreboot.org/c/coreboot/+/86869
Until you can set yourself up there, I'll also check this issue for reports.
* For the VGA port, you may want to try commenting "select GFX_GMA_ANALOG_I2C_HDMI_B" in Kconfig. See if removing it makes the VGA port work in SeaBIOS. * The black SATA port is eSATA; you'll need the right cable. I made the sata_port_map change in the patch. Please test. * Check your coreboot log that "early_usb_init: USB00: USBIR_TXRX_GAIN_MOBILE_LOW is an invalid setting for desktop!" no longer appears. * WOL and iGPU+dGPU has been a long standing chipset issue that does need to be addressed, but they're bigger issue than just one board. * Please also test edk2 payload. If you aren't set up for UEFI booting, try a live Linux distro.
---------------------------------------- Support #581: success new variant "compaq_pro_6300_sff" for hp/snb_ivb_desktops compatible with "compaq_8300_elite_sff" template https://ticket.coreboot.org/issues/581#change-2008
* Author: Walter Sonius * Status: New * Priority: Normal * Category: board support * Target version: none * Start date: 2025-03-15 ---------------------------------------- Successful flash and coreboot SeaBIOS functioning of a HP "compaq_pro_6300_sff" with a unchanged "compaq_8300_elite_sff" template using coreboot (24.12-758-g1e7ba810c6bb) and SeaBIOS (version rel-1.16.3-0-ga6ed6b70).
These two HP Compaq devices are extremely similar, they use the same OEM proprietary BIOS upgrade files. Hardware wise the only 3 noticeable differences are that the "compaq_8300_elite_sff" comes with a Q77 chipset, SuperIO NPCD378 and J32 labeled 16x length "white" PCI-E slot versus a Q75 chipset, SuperIO NPCD379HAKFX with the J32 labeled slot populated with a limited physical 1x length "black" PCI-E slot on the "compaq_pro_6300_sff".
Flashing from OEM proprietary BIOS 3.08revA enabling the FDO jumper on the motherboard as described for the compaq_8300_elite_sff works by booting with "iomem=relaxed" kernel parameter and specifying the specific 16MB chip 25Q128A: flashrom -p internal -w cbtest.rom -c "MT25QL128"
Tested and Working: Poweron/Poweroff/Reboot CPU i3-3220 / e3-1225v2 RAM 1x 2x 4x populated slots total of 4GB/8GB/16GB/24GB (both 1.35v and 1.5v modules mixed with ECC) Serial port (including coreboot) PS2 keyboard (including SeaBIOS) PS2 mouse SATA 3 ports (blue/white/white) USB 2.0 4x front & 2x back ports USB 3.0 4x back ports Ethernet 1Gbit/100Mbit Display port works in SeaBIOS and OS VGA port only works in OS! PCI using realtek RTL8169 1Gb PCIE 3.0 16x using 2.0 8x 10Gb intel X540-AT2 / using 1.0 16x Nvidia Geforce 6200 LE (also works in SeaBIOS) PCIE 2.0 1x using 2.0 1x 2.5Gb realtek RTL8125 PCIE 2.0 1x using 1.0 1x 1Gb intel 82574L (SeaBIOS loads option rom) Audio built-in speaker (plays music in OS compared to legacy bleep pc-speaker) Audio front panel 3.5 mm headphone jack (auto disables built-in Speakers and selects Headphones) Audio front panel 3.5 mm headphone&mic jack (only microphone works with 4 pin 3.5mm combi mic/headphone) Audio back panel 3.5mm green jack (manually select Line Out and it works) Sensors CPU and 2 motherboard sensors SuperIO Booting USB / SATA(HDD/DVD) OS: Fedora-mate Linux kernel 6.11.4 / 6.13.6, KDE neon Linux kernel 6.8.0-52 Flashrom: needs additional parameters compared to OEM BIOS both for read/write depending on flashrom version?
flashrom -p internal:boardmismatch=force,ich_spi_mode=hwseq -w test.rom -c "Opague flash chip"
Tested not Working: RAM ECC functioning (see coreboot log) SATA port black Wakeonlan, it just auto wakes from itself so cannot verify... iGPU multigpu with PCIE nvidia geforce 6200 le, only PCIE nvidia geforce works and iGPU gets disabled.
What to do next to get this "compaq_pro_6300_sff" variant officially supported?
*Supply more logs/info? *Fill a bug for the ECC not working or first get this variant supported as is? *Fill a bug that VGA doesn't work in SeaBIOS? *Fill a bug/ticket on the flashrom support list for the difference in parameters needed pre/post flash?
https://support.hp.com/us-en/drivers/hp-compaq-pro-6300-small-form-factor-pc... https://support.hp.com/in-en/drivers/hp-compaq-elite-8300-small-form-factor-...
Walter Sonius
---Files-------------------------------- cb-log-hp-compaq_pro_6300_sff.txt (51.8 KB) hp-compaq-pro-6300-oem-and-coreboot-autoport.zip (266 KB)