Re: [coreboot] [patch] and/or busybox issue with alix2c3 serial console

[Roman Yeryomin]

On Wed, Nov 5, 2008 at 11:35 PM, Roman Yeryomin  wrote:
> On Wed, Nov 5, 2008 at 8:09 PM, Marc Jones  wrote:
> > I see the problem. It is interesting that in some situations that it works.
> >
> > Marc
> >
> > LPC serial IRQs were being left enabled when there is no LPC serial device.
> >
> > Signed-off-by: Marc Jones
> > Index: mainboard/pcengines/alix2c3/dts
> >
> > --- mainboard/pcengines/alix2c3/dts     (revision 980)
> > +++ mainboard/pcengines/alix2c3/dts     (working copy)
> > @@ -34,9 +34,9 @@
> >                        /config/("southbridge/amd/cs5536/dts");
> >                        /* Interrupt enables for LPC bus.
> >                         *  Each bit is an IRQ 0-15. */
> >                   lpc_serirq_enable = "0x0000105A";
> >                   lpc_serirq_enable = "0x00001002";
> >                  /* LPC IRQ polarity. Each bit is an IRQ 0-15. */
> >                   lpc_serirq_polarity = "0x0000EFA5";
> >                   lpc_serirq_polarity = "0x0000EFFD";
> >                  /* 0:continuous 1:quiet */
> >                  lpc_serirq_mode = "1";
> >                  /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none.
>
> tried this with my mods but didn't work
> will try a clean build now..

WOW! Cool! :) It works!

Roman