[coreboot] [PATCH] artecgroup/dbe62: Set up 4MB mode for LPC dongle

[Mart Raudsepp]

artecgroup/dbe62: Set up 4MB mode for LPC dongle

This way we can fit a kernel and initramfs on the dongle's free ~3.75MB space and have a debug system bootable right from inside the dongle.
The start address of the dongle is mem@0xffc00000 for FILO with 4MB minus ROM area available.

Signed-off-by: Mart Raudsepp 
---

For your consideration of suitability for stage1 mainboard setup.

mainboard/artecgroup/dbe62/stage1.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/mainboard/artecgroup/dbe62/stage1.c b/mainboard/artecgroup/dbe62/stage1.c
index 45a7c1c..45609ce 100644
--- a/mainboard/artecgroup/dbe62/stage1.c
+++ b/mainboard/artecgroup/dbe62/stage1.c
@@ -59,6 +59,9 @@ void hardware_stage1(void)
     * early MSR setup for the CS5536.
     */
    cs5536_setup_onchipuart(2);
+
+	/* Set up 4MB mode for Artec LPC Dongle */
+	outb(0xf4,0x88);
 }

void mainboard_pre_payload(void)