The only thing that didn't patch cleanly on my setup was a config file for a Tyan board. Was there anything else that didn't apply cleanly to a CVS tree, Ollie? It might be nice to get that ATi and btext stuff in there quickly since there are likely others who are very, very interested in this patch. Though I know Ron wanted to review the superIO and PNP changes a little more after finishing his paperwork :-/
On Fri, 23 Apr 2004, YhLu wrote:
So I need to produce another patch except 3, 4 & 5?
-----ÓʼþÔ¼þ----- ·¢¼þÈË: Li-Ta Lo [mailto:ollie@lanl.gov] ·¢ËÍʱ¼ä: 2004Äê4ÔÂ23ÈÕ 11:00 ÊÕ¼þÈË: YhLu ³ËÍ: ron minnich; Stefan Reinauer; LinuxBIOS Ö÷Ìâ: Re: ATI rage xl.init
On Fri, 2004-04-23 at 11:56, YhLu wrote:
You only commit 4 & 5 ?
I haven't commit anything yet. I am busy working on the ibm/e325 HT enumeration problem. I will look at the patch next week.
Ollie
-----ÓʼþÔ¼þ----- ·¢¼þÈË: Li-Ta Lo [mailto:ollie@lanl.gov] ·¢ËÍʱ¼ä: 2004Äê4ÔÂ21ÈÕ 14:47 ÊÕ¼þÈË: YhLu ³ËÍ: ron minnich; Stefan Reinauer; LinuxBIOS Ö÷Ìâ: Re: ATI rage xl.init
On Tue, 2004-04-20 at 19:38, YhLu wrote:
Ron,
Please commit ati rage xl support.
- ati rage xl support
- add btext_console to use rage xl fb.
- enable pnp init calling
- superio Winbond: real enable/disable device.
- superio Winbond: enable HW
- Tyan S2850 support update
- Tyan S2875 support added.
- Move some PCI master enable driver to /driver dir.
Stefan,
Please test the filo too, I add the btext_console into it. On vocation? Why using stepan@openbios.org ?
there are some conflicts between your tree and the current CVS. Could you do cvs update and send me the patch again ?
Ollie
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios