hi elisenda, how did you build the seabios? what do you mean by "attached a bootorder file with cbfstool"? the log shows that the payload could not be executed correctly.
Best wishes QingPei Wang Phone: 86+018930528086
On Wed, Nov 2, 2011 at 3:25 AM, Elisenda Cuadros lists@e4l.es wrote:
Hello,
First of all I am new to the list. Congratulations to all developers for this great work.
I have an Epia M-II and I want to install coreboot on it. This board is supported, great news!.
I extracted the vga rom with bios_extract (CLE1622A.rom) and I put it inside menuconfig (pci 1106,3122).
I built Seabios with Coreboot and attached a bootorder file with cbfstool.
When I try boot the board with the resulting rom it seems like it´s in a loop. The VGA output is not good. I am not able to view any payload messages.
I am using coreboot v4 from git.
Because of it is my first experience with coreboot I don´t have any ideas for what is causing of the problem. I attach you it if you want to take a look.
Thanks in advance.
Best regards,
Elisenda
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot