Re: fallback reset_vector offset

YhLu  writes:
> The problem solved.
>
> I switch the auto.c... before reset.inc in MB Config.lb
>
> Also add two inc in it
>
> mainboardinit arch/i386/lib/jmp_auto_out.inc
> after auto.c segment
>
> mainboardinit arch/i386/lib/jmp_auto.inc
> in old auto.c position
>
> please advise where to put these two inc.
>
> jmp_auto_out.inc
> /* -*- asm -*- */
>     /* clear boot_complete flag */
>     xorl    %ebp, %ebp
>     jmp     __main
>
> jmp_auto.inc
>
> /* -*- asm -*- */
>         jmp     __fpu_start

Progress however unless I am mistaken this will fail miserably on
an 8111 that only enables 64KiB of ROM by default.

I think all of failover.c needs to be put in the magic position,
if we are going to allow arbitrary memory size code.

Eric