Re: [coreboot] [PATCH] Support for Intel D810E2CB (i810e/ICH2)

[Joseph Smith]

On 06/20/2010 07:55 AM, Stefan Reinauer wrote:
> > Hello,
> > This patch adds support for the Intel D810E2CB desktop board. This
> > patch has to go in after the other two patches I have submitted, it is
> > dependent on them. Hurray, this is the first i810 board running CAR :-)
> >
> > Build and boot (bootlog attached) tested:
> >
> > Signed-off by: Joseph Smith
>
> Acked-by: Stefan Reinauer 
> with some caveats:
> > Index: src/mainboard/intel/d810e2cb/gpio.c
> >
> > --- src/mainboard/intel/d810e2cb/gpio.c	(revision 0)
> > +++ src/mainboard/intel/d810e2cb/gpio.c	(revision 0)
> > @@ -0,0 +1,212 @@
> > +#define ICH_IO_BASE_ADDR	0x00000500 /* GPIO base address register */
>
> This is duplicated from i82801ax_lpc.c ... Can it go into i82801ax.h and
> be included here instead? (It's also called GPIO_BASE_ADDRESS elsewhere)
> > /* Set the value for GPIO base address register and enable GPIO. */
> > pci_write_config32(dev, 0x58, (ICH_IO_BASE_ADDR | 1));
> > pci_write_config8(dev, 0x5c, 0x10);
>
> 0x58 is GPIO_BASE_ICH0_5 in i82801ax.h (should be renamed to GPIO_BASE I
> guess)
> > udelay(10);
> > Index: src/mainboard/intel/d810e2cb/Kconfig
> >
> > --- src/mainboard/intel/d810e2cb/Kconfig	(revision 0)
> > +++ src/mainboard/intel/d810e2cb/Kconfig	(revision 0)
> > @@ -0,0 +1,65 @@
> > +##
> > +## This file is part of the coreboot project.
> > +##
> > +## Copyright (C) 2010 Joseph Smith
> > +##
> > +## This program is free software; you can redistribute it and/or modify
> > +## it under the terms of the GNU General Public License as published by
> > +## the Free Software Foundation; version 2 of the License.
> > +##
> > +## This program is distributed in the hope that it will be useful,
> > +## but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +## GNU General Public License for more details.
> > +##
> > +## You should have received a copy of the GNU General Public License
> > +## along with this program; if not, write to the Free Software
> > +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
> > +##
> >
> > +config BOARD_INTEL_D810E2CB
> > bool "D810E2CB"
> > select ARCH_X86
> > select CPU_INTEL_SOCKET_FC_PGA370
> > select NORTHBRIDGE_INTEL_I82810
> > select SOUTHBRIDGE_INTEL_I82801BX
> > select SUPERIO_SMSC_SMSCSUPERIO
> > select HAVE_PIRQ_TABLE
> > select UDELAY_TSC
> > select BOARD_ROMSIZE_KB_512
> > select HAVE_MAINBOARD_RESOURCES
> > select USE_PRINTK_IN_CAR
>
> can this go into the CPU's Kconfig?
> > select GFXUMA
> > select USE_DCACHE_RAM
>
> And this, too?
> > select TINY_BOOTBLOCK
>
> And this?
> > +config MAINBOARD_DIR
> > string
> > default intel/d810e2cb
> > depends on BOARD_INTEL_D810E2CB
> >
> > +config MAINBOARD_PART_NUMBER
> > string
> > default "D810E2CB"
> > depends on BOARD_INTEL_D810E2CB
> >
> > +config HAVE_OPTION_TABLE
> > bool
> > default n
> > depends on BOARD_INTEL_D810E2CB
> >
> > +config DCACHE_RAM_BASE
> > hex
> > default 0xffdf8000
> > depends on BOARD_INTEL_D810E2CB
>
> And this.
> > +config DCACHE_RAM_SIZE
> > hex
> > default 0x8000
> > depends on BOARD_INTEL_D810E2CB
>
> And this.
> > +config IRQ_SLOT_COUNT
> > int
> > default 7
> > depends on BOARD_INTEL_D810E2CB
>
> Stefan

Done, thanks r5637 and r5638