Re: Geode Kernel Config

[Peter Stuge]

On Tue, Nov 26, 2002 at 06:45:45PM -0500, Adam Bezanson wrote:
> Hi,
>
> I've got an Eval card from National Semi that contains
> the SC1200. I'd like to try LinuxBios on it.
> I've downloaded both the 2.4.18 and 2.4.19 kernels to start with.
> What patches do I need to apply to the kernel?
> Is there a config file I can use to configure the kernel, or
> should I do it manually?

You'll have to set up a new mainboard directory for the evaluation board
configuration where lots of details about the board have to be entered.
It isn't all that hard but wading through the data sheet to learn the
architecture and all of the registers took me a while.

//Peter