Re: K8 MTRR reboot on Solo

[YhLu]

There is an X86-64 option in Etherboot config, did you enable it?

Regards

YH.

-----邮件原件-----
发件人: Stefan Reinauer [mailto:[e-mail]] 
发送时间: 2003年10月6日 7:38
收件人: [e-mail]
主题: Re: K8 MTRR reboot on Solo

* Stefan Reinauer  [031006 14:13]:

the card is connected with a cross cable to a HDAMA..

etherboot 5.3.1:
> [tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE
> Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit)
> Link is up at 1000 Mbps, full duplex. TX RX flow control
> Searching for server (DHCP)...
> ..UDP checksum error
> .UDP checksum error
> .UDP checksum error
> ..Me: 192.168.0.20, Server: 192.168.0.23
> Loading 192.168.0.23:legacybios ...
>
> <takes forever>

etherboot 5.3.2:
Etherboot 5.3.2 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE]

Relocating _text from: [000264d0,00058500) to [0fecdfd0,0ff00000)

.ÿProbing pci nic...or (Q)uit?

[tg3-5701]Ethernet addr: 00:04:76:F3:A9:CE

Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit)

Link is up at 1000 Mbps, full duplex. TX RX flow control

Searching for server (DHCP)...

..transmit timed out

tg3_stop_block timed out, ofs=00003c00 enable_bit=00000002

.<abort>

etherboot 5.2.2 seems to be the same as 5.2.0

Best regards,
  Stefan Reinauer