Hi,
1.1.6 seems really picky when using etherboot for network booting. The link seems very often to go up and down at will, before a real boot happens. See attached log.
Any idea?
Regards, Stefan
-----------------------------------------------------------------------
LinuxBIOS-1.1.6.0-Fallback Mo Mär 22 17:42:39 CET 2004 starting... setting up resource map....done. ht reset -
LinuxBIOS-1.1.6.0-Fallback Mo Mär 22 17:42:39 CET 2004 starting... setting up resource map....done. Initializing memory: done Clearing LinuxBIOS memory: done Testing DRAM : 00000000-00100000 DRAM fill: 00000000-00100000 00100000 DRAM filled DRAM verify: 00000000-00100000 00100000 DRAM verified Done. Copying LinuxBIOS to ram. Jumping to LinuxBIOS. Jumping to LinuxBIOS. ROM segment 0xb7fa length 0xff3e reloc 0x00020000 CPU 1650 Mhz Etherboot 5.3.6 (GPL) http://etherboot.org Tagged ELF for [TG3][IDE] Relocating _text from: [000264e0,00058510) to [1fecdfd0,1ff00000) Boot from (N)etwork or (Q)uit? ^TProbing pci nic... [tg3-5701]Ethernet addr: 00:04:76:E0:11:99 Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:32-bit) Link is up at 1000 Mbps, full duplex. TX RX flow control Searching for server (DHCP)... .Link is down. Link is up at 1000 Mbps, full duplex. TX RX flow control Link is down. Link is up at 1000 Mbps, full duplex. TX RX flow control Link is down. Link is up at 1000 Mbps, full duplex. TX RX flow control .Link is down.
[..]
Link is up at 1000 Mbps, full duplex. TX RX flow control ..Me: 192.168.0.2, Server: 192.168.0.1 Loading 192.168.0.1:kernel.elf ...(ELF)... ........... [..] ......done Firmware type: LinuxBIOS