Re: [LinuxBIOS] New Target for LinuxBios MB1030 / 3036

[Christian Sühs]

Stefan Reinauer schrieb:
> Christian Sühs  [060421 15:27]:
> > > PCI: 00:13.0 init
> > > Devices initialized
> > > Copying IRQ routing tables to 0xf0000...done.
> > > Verifing copy of IRQ routing tables at 0xf0000...failed
> >
> > What could be a reason for that?
>
> CONFIG_COMPRESS is enabled. PIRQ tables are obsolete when you use ACPI,
> so if possible, go ACPI.

Jup ;)

but now it works :D
I don't know, what I have made wrong or what I have changed. It seems 
that false filo settings have made the trouble.

However, the board starts with eaglelion/5bcm target.

Ok, now I need the best way to get vga working. Any ideas?
There is a Cyberpro 5000 on the board, normaly the vgabios is included 
in the factory bios. I think the chip is on the pci bus.
Could I try the emulator to load the vgabios?

chris