if the AmdSpiRomProtect modules have been deleted in the factory image previously. So what does that mean? How can i do that? I would like to flash it internal
I don't recognize the "AmdSpiRomProtect modules". My top guess, though, is it's referring to something that would program the RomProtect registers at D14F3x050, 54, etc. These are write-once and require a reset to unprotect the regions.
Thanks, Marshall
On Fri, Oct 16, 2020 at 11:03 AM Mike Banon mikebdp2@gmail.com wrote:
maybe Balazs could advise. However, to make sure you could easily unbrick your A88XM-E in the case of a bad coreboot build, I really recommend you to order a cheap USB CH341A programmer (preferably with a Green PCB) - and PLCC clip to easily remove a DIP8 flash chip from a motherboard's socket without bending the chip's legs. Then, you'll be able to easily install a new coreboot image by plugging a DIP8 flash chip into the programmer's socket and using the opensource flashrom tool.
On Fri, Oct 16, 2020 at 10:04 AM mejim67741--- via coreboot coreboot@coreboot.org wrote:
The documentation says
The main SPI flash can be accessed using flashrom, if the
AmdSpiRomProtect modules have been deleted in the factory image previously.
So what does that mean? How can i do that? I would like to flash it
internal
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org
coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-leave@coreboot.org