Hi,
haven't pushed the changes to add the v2.0 as variant of the v1.0 yet and probably won't get around to do that in the next few months. Only spent one evening on getting coreboot to work on the v2.0 device and mainly figured out how things are connected and found some bugs in the v1.0 code while doing that. Those v1.0 fixes are in upstream, but haven't been validated on hardware due to the original author of that port being unresponsive. The main thing that I haven't figured out on the v2.0 is how to make the Type A USB3 ports working, since the super speed lanes of those aren't connected to the PCH's HSIO lines, but to the TCSS ports on the CPU; by the Intel guide that's not a supported configuration. This works under the vendor firmware and I don't see any reason why it shouldn't, but I haven't figured out how to make that work on coreboot+FSP.
Regards, Felix
On 09/02/2025 19:03, Matt DeVillier wrote:
There is currently support for the CWWK CW-ADL-4L v1.0, and support for v2.0 is under review, though I'm not sure if either is 100% working
Adding Felix Held to the chain, as I think he's been working on one/both versions
cheers, Matt
On Sun, Feb 9, 2025 at 7:35 AM Eero Volotinen <eero.volotinen@iki.fi mailto:eero.volotinen@iki.fi> wrote:
Hi, Is there any cheap firewall box at aliexpress that can support coreboot? Eero _______________________________________________ coreboot mailing list -- coreboot@coreboot.org <mailto:coreboot@coreboot.org> To unsubscribe send an email to coreboot-leave@coreboot.org <mailto:coreboot-leave@coreboot.org>