* Copying of files from other mainboards as a starting point: amd/db800/Makefile artecgroup/dbe62/cmos.layout artecgroup/dbe62/dts amd/db800/initram.c artecgroup/dbe61/irq_tables.h artecgroup/dbe62/stage1
* Kconfig integration. Behind CONFIG_EXPERIMENTAL for now, as the board is not in the market yet.
Signed-off-by: Mart Raudsepp mart.raudsepp@artecdesign.ee --- mainboard/artecgroup/Kconfig | 16 ++++
These should be done with a proper "svn copy" from the files referenced above in commit log:
mainboard/artecgroup/dbe63/Makefile | 34 +++++++++ mainboard/artecgroup/dbe63/cmos.layout | 74 +++++++++++++++++++ mainboard/artecgroup/dbe63/dts | 70 ++++++++++++++++++ mainboard/artecgroup/dbe63/initram.c | 118 +++++++++++++++++++++++++++++++ mainboard/artecgroup/dbe63/irq_tables.h | 66 +++++++++++++++++ mainboard/artecgroup/dbe63/stage1.c | 71 ++++++++++++++++++ 7 files changed, 449 insertions(+), 0 deletions(-) create mode 100644 mainboard/artecgroup/dbe63/Makefile create mode 100644 mainboard/artecgroup/dbe63/cmos.layout create mode 100644 mainboard/artecgroup/dbe63/dts create mode 100644 mainboard/artecgroup/dbe63/initram.c create mode 100644 mainboard/artecgroup/dbe63/irq_tables.h create mode 100644 mainboard/artecgroup/dbe63/stage1.c
diff --git a/mainboard/artecgroup/Kconfig b/mainboard/artecgroup/Kconfig index 567e1bd..fe7acea 100644 --- a/mainboard/artecgroup/Kconfig +++ b/mainboard/artecgroup/Kconfig @@ -43,6 +43,17 @@ config BOARD_ARTECGROUP_DBE62 help Artec Group DBE62 ThinCan.
+config BOARD_ARTECGROUP_DBE63 + bool "DBE63" + select ARCH_X86 + select CPU_AMD_GEODELX + select NORTHBRIDGE_AMD_GEODELX + select SOUTHBRIDGE_AMD_CS5536 + select PIRQ_TABLE + depends EXPERIMENTAL + help + Artec Group DBE63 ThinCan. + endchoice
config MAINBOARD_DIR @@ -54,3 +65,8 @@ config MAINBOARD_DIR string default artecgroup/dbe62 depends BOARD_ARTECGROUP_DBE62 + +config MAINBOARD_DIR + string + default artecgroup/dbe63 + depends BOARD_ARTECGROUP_DBE63 diff --git a/mainboard/artecgroup/dbe63/Makefile b/mainboard/artecgroup/dbe63/Makefile new file mode 100644 index 0000000..a8bd1db --- /dev/null +++ b/mainboard/artecgroup/dbe63/Makefile @@ -0,0 +1,34 @@ +## +## This file is part of the coreboot project. +## +## Copyright (C) 2006-2007 coresystems GmbH +## (Written by Stefan Reinauer stepan@coresystems.de for coresystems GmbH) +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +STAGE0_MAINBOARD_SRC := $(src)/mainboard/$(MAINBOARDDIR)/stage1.c + +INITRAM_SRC = $(src)/mainboard/$(MAINBOARDDIR)/initram.c \ + $(src)/northbridge/amd/geodelx/raminit.c \ + $(src)/southbridge/amd/cs5536/smbus_initram.c \ + $(src)/arch/x86/geodelx/geodelx.c + +STAGE2_MAINBOARD_SRC = + +$(obj)/coreboot.vpd: + $(Q)printf " BUILD DUMMY VPD\n" + $(Q)dd if=/dev/zero of=$(obj)/coreboot.vpd bs=256 count=1 $(SILENT) + diff --git a/mainboard/artecgroup/dbe63/cmos.layout b/mainboard/artecgroup/dbe63/cmos.layout new file mode 100644 index 0000000..5ba4c03 --- /dev/null +++ b/mainboard/artecgroup/dbe63/cmos.layout @@ -0,0 +1,74 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +1008 16 h 0 check_sum + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM + +checksums + +checksum 392 1007 1008 + + diff --git a/mainboard/artecgroup/dbe63/dts b/mainboard/artecgroup/dbe63/dts new file mode 100644 index 0000000..8089e79 --- /dev/null +++ b/mainboard/artecgroup/dbe63/dts @@ -0,0 +1,70 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2008 Ronald G. Minnich rminnich@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/{ + mainboard_vendor = "Artec"; + mainboard_name = "DBE62"; + cpus { }; + apic@0 { + /config/("northbridge/amd/geodelx/apic"); + }; + domain@0 { + /config/("northbridge/amd/geodelx/domain"); + pci@1,0 { + /config/("northbridge/amd/geodelx/pci"); + /* Video RAM has to be in 2MB chunks. */ + geode_video_mb = "16"; + }; + pci@1,1 { + /* This is the graphics device, but since the memory + * controller needs to know geode_video_mb, the + * phase2_init is done there. The rest are default ops. + */ + }; + pci@1,2 { /* AES */ + }; + pci@f,0 { + /config/("southbridge/amd/cs5536/dts"); + /* Interrupt enables for LPC bus. + * Each bit is an IRQ 0-15. */ + lpc_serirq_enable = "0x00001002"; + /* LPC IRQ polarity. Each bit is an IRQ 0-15. */ + lpc_serirq_polarity = "0x0000EFFD"; + /* 0:continuous 1:quiet */ + lpc_serirq_mode = "1"; + /* GPIO(0-0x20) for INT D:C:B:A, 0xFF=none. + * See virtual PIC spec. */ + enable_gpio_int_route = "0x0D0C0700"; + /* 0:IDE; 1:FLASH on CS0, 2:FLASH on CS1, 3:FLASH on CS2, 4:FLASH on CS3. */ + enable_ide_nand_flash = "2"; + /* we use com2 since that is on the dongle */ + com2_enable = "1"; + /* Set com2 address to be COM1 */ + com2_address = "0x3f8"; + /* Set com2 IRQ to be what is usually COM1 */ + com2_irq = "4"; + /* USB Port Power Handling setting. */ + pph = "0xf5"; + }; + pci@f,1 { + /config/("southbridge/amd/cs5536/nand"); + }; + }; +}; diff --git a/mainboard/artecgroup/dbe63/initram.c b/mainboard/artecgroup/dbe63/initram.c new file mode 100644 index 0000000..34f3308 --- /dev/null +++ b/mainboard/artecgroup/dbe63/initram.c @@ -0,0 +1,118 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define _MAINOBJECT + +#include <types.h> +#include <lib.h> +#include <console.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <msr.h> +#include <io.h> +#include <amd_geodelx.h> +#include <northbridge/amd/geodelx/raminit.h> + +/* #include <device/smbus.h> + * TODO: figure out how smbus functions should be done. See smbus_ops.c + */ +extern int smbus_read_byte(u16 device, u8 address); + +#define MANUALCONF 0 /* Do automatic strapped PLL config */ +#define PLLMSRHI 0x00001490 /* manual settings for the PLL */ +#define PLLMSRLO 0x02000030 +#define DIMM0 ((u8) 0xA0) +#define DIMM1 ((u8) 0xA2) + +/** + * Read a byte from the SPD. + * + * For this board, that is really just saying 'read a byte from SMBus'. + * So we use smbus_read_byte(). Nota Bene: leave this here as a function + * rather than a #define in an obscure location. This function is called + * only a few dozen times, and it's not performance critical. + * + * @param device The device. + * @param address The address. + * @return The data from the SMBus packet area or an error of 0xff (i.e. -1). + */ +u8 spd_read_byte(u16 device, u8 address) +{ + u8 spdbyte; + + printk(BIOS_DEBUG, "spd_read_byte dev %04x\n", device); + + spdbyte = smbus_read_byte(device, address); + + printk(BIOS_DEBUG, " addr %02x returns %02x\n", address, spdbyte); + + return spdbyte; +} + +/** + * Placeholder in case we ever need it. Since this file is a + * template for other motherboards, we want this here and we want the + * call in the right place. + */ + +static void mb_gpio_init(void) +{ + /* Early mainboard specific GPIO setup */ +} + +/** + * main for initram for the AMD DB800 development platform. + * It might seem that you could somehow do these functions in, e.g., the cpu + * code, but the order of operations and what those operations are is VERY + * strongly mainboard dependent. It's best to leave it in the mainboard code. + */ +int main(void) +{ + printk(BIOS_DEBUG, "Hi there from initram (stage1) main!\n"); + post_code(POST_START_OF_MAIN); + + system_preinit(); + printk(BIOS_DEBUG, "done preinit\n"); + + mb_gpio_init(); + printk(BIOS_DEBUG, "done gpio init\n"); + + pll_reset(MANUALCONF, PLLMSRHI, PLLMSRLO); + printk(BIOS_DEBUG, "done pll reset\n"); + + cpu_reg_init(0, DIMM0, DIMM1, DRAM_UNTERMINATED); + printk(BIOS_DEBUG, "done cpu reg init\n"); + + sdram_set_registers(); + printk(BIOS_DEBUG, "done sdram set registers\n"); + + sdram_set_spd_registers(DIMM0, DIMM1); + printk(BIOS_DEBUG, "done sdram set spd registers\n"); + + sdram_enable(DIMM0, DIMM1); + printk(BIOS_DEBUG, "done sdram enable\n"); + + /* Check low memory */ + /*ram_check(0x00000000, 640*1024); */ + + printk(BIOS_DEBUG, "stage1 returns\n"); + return 0; +} diff --git a/mainboard/artecgroup/dbe63/irq_tables.h b/mainboard/artecgroup/dbe63/irq_tables.h new file mode 100644 index 0000000..4649ef0 --- /dev/null +++ b/mainboard/artecgroup/dbe63/irq_tables.h @@ -0,0 +1,66 @@ +/* +* This file is part of the coreboot project. +* +* Copyright (C) 2007 Advanced Micro Devices, Inc. +* Copyright (C) 2008 Artec Design LLC. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include <pirq_routing.h> + +/* Number of slots and devices in the PIR table */ +#define IRQ_SLOT_COUNT 3 + +/* Platform IRQs */ +#define PIRQA 11 +#define PIRQB 10 +#define PIRQC 9 +#define PIRQD 5 + +/* Map */ +#define M_PIRQA (1 << PIRQA) /* Bitmap of supported IRQs */ +#define M_PIRQB (1 << PIRQB) /* Bitmap of supported IRQs */ +#define M_PIRQC (1 << PIRQC) /* Bitmap of supported IRQs */ +#define M_PIRQD (1 << PIRQD) /* Bitmap of supported IRQs */ + +/* Link */ +#define L_PIRQA 1 /* Means Slot INTx# Connects To Chipset INTA# */ +#define L_PIRQB 2 /* Means Slot INTx# Connects To Chipset INTB# */ +#define L_PIRQC 3 /* Means Slot INTx# Connects To Chipset INTC# */ +#define L_PIRQD 4 /* Means Slot INTx# Connects To Chipset INTD# */ + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32 + 16 * IRQ_SLOT_COUNT, /* Max. number of devices on the bus */ + 0x00, /* Where the interrupt router lies (bus) */ + (0x0F << 3) | 0x0, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + 0x1022, /* Vendor */ + 0x208f, /* Device */ + 0, /* Crap (miniport) */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */ + 0xf8, /* Checksum */ + { + /* If you change the number of entries, change IRQ_SLOT_COUNT above! */ + /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ + // Geode GX3 Host Bridge and VGA Graphics + {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + // Geode CS5535/CS5536 IO Companion: USB controllers, IDE, Audio. + {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0}, + // Realtek RTL8100/8139 Network Controller + {0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {0x00, 0x00}, {0x00, 0x00}, {0x00, 0x00}}, 0x0, 0x0}, + } +}; diff --git a/mainboard/artecgroup/dbe63/stage1.c b/mainboard/artecgroup/dbe63/stage1.c new file mode 100644 index 0000000..46864be --- /dev/null +++ b/mainboard/artecgroup/dbe63/stage1.c @@ -0,0 +1,71 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2008 Ronald G. Minnich rminnich@gmail.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <types.h> +#include <lib.h> +#include <console.h> +#include <device/device.h> +#include <device/pci.h> +#include <string.h> +#include <msr.h> +#include <io.h> +#include <amd_geodelx.h> +#include <southbridge/amd/cs5536/cs5536.h> +#include <northbridge/amd/geodelx/raminit.h> +#include <arch/x86/msr.h> + +static const struct msrinit dbe62_msr[] = { + {.msrnum = 0x10000020, {.lo = 0x00fff80, .hi = 0x20000000}}, + {.msrnum = 0x10000021, {.lo = 0x80fffe0, .hi = 0x20000000}}, + {.msrnum = 0x40000020, {.lo = 0x00fff80, .hi = 0x20000000}}, + {.msrnum = 0x40000021, {.lo = 0x80fffe0, .hi = 0x20000000}}, +}; + +static void dbe62_msr_init(void) +{ + int i; + for (i = 0; i < ARRAY_SIZE(dbe62_msr); i++) + wrmsr(dbe62_msr[i].msrnum, dbe62_msr[i].msr); +} + +void hardware_stage1(void) +{ + post_code(POST_START_OF_MAIN); + + dbe62_msr_init(); + + cs5536_stage1(); + + /* + * NOTE: Must do this AFTER the early_setup! It is counting on some + * early MSR setup for the CS5536. + */ + cs5536_setup_onchipuart(2); + + /* Set up 4MB mode for Artec LPC Dongle (this should be a no-op when not booting from the dongle) */ + outb(0xf4,0x88); +} + +void mainboard_pre_payload(void) +{ + geode_pre_payload(); + banner(BIOS_DEBUG, "mainboard_pre_payload: done"); +}