Re: [LinuxBIOS] New guy in LinuxBios

[Vincente Tsou]

Hello,

Finally my linuxbios bring up the target board.

capture5.txt is booting log.

But most of device on the target board are not work.
Such as BCM5704 under PCI-X bridge.

If I try to load "tg3" module into the kernel, I got error message like
this,
[root@linuxbios ~]# modprobe tg3
PCI: No IRQ known for interrupt pin A of device 0000:03:04.0. Please try
using pci=biosirq.
PCI: No IRQ known for interrupt pin B of device 0000:03:04.1. Please try
using pci=biosirq.

How to assign an IRQ for each device ??

2006/5/12, Stefan Reinauer :
> Vincente Tsou  [060512 06:22]:
> > Dear Lu and Stefan,
> >
> > Thank you very much for your reply.
> >
> > But I can't find the inherent_ht.c in my LinuxBios source tree.
>
> Yinghai is talking about src/northbridge/amd/amdk8/incoherent_ht.c
>
> You need to try commenting out the lines I sent in the last mail from
> src/northbridge/amd/amdk8/resourcemap.c
>
> Stefan