I am a newbie in the fiels of LinuxBios, I want to make linuxbios for the STPC Atlas , I know it is not supported in the freebios2 but it is supprted in the freebios (1).
I don't think the Atlas is supported. Whats in V1 is the consumer2 product. Offhand I don't remember the difference between the 2.
Bit I have found making of first version is diffrent from that of freebios2 . I want to use Etherboot as payload for this bios. Somebody plz do this favour for me that tell me exact steps
- Downloading freebios version 1 (Usually when i download it misses some
files)
Which files?
- Compiling etherboot as payload.
I've attached a FAQ I did a long time ago. It has some stuff on etherboot wich may be useful. Its almost 2 years old though so use it more as a guideline rather than an absolute reference.
- Compiling and building freeebios
1) Create a build directory somewhere outside the linubios tree. Lets use lb_atlas for example.
In lb_atlas create a config file: atlas.config. In this file you need at minimum
target src mainboard stpc/consumer2
payload <path_to_etherboot_image>
There are probally lots of other options you may need to include. You will have to look at the source code to figure out what they need to be.
Then run the following:
python /path/to/freebios/util/config/NLBConfig.py /path/to/lb_atlas/atlas.config /path/to/freebios
This will create a lb_atlas/src directory with all the source for a consumer setup.
Then you cd to src and type make.
I want final output as a rom image that i can burn into BIOS chip.
The final output will be called romimage