Hi Iain,
On 5/13/21 8:15 PM, lain wrote:
Hello Michal, i found the regarding problem. The board i got from aliexpress has an SUPERIO 8613 insteat of a SUPERIO 8772F, this other superio seem to be support by coreboot but dumbly changing this in the .config seems to fail, do you think you could help me compiling it for this SUPERIO chip ?
Okay that would explain everything. Is this the Protectli branded board or the chinese Yanling?
I can upload some blind patch that will support ITE 8613, but could you please run coreboot's superiotool on the ORIGINAL firmware? ITE8613 clock settings are a bit tricky, so I need a dump of the settings. Because of the tricky clock settings, you get the garbage on serial port now so copyign from FW2B/FW4B is not the best way to go.
Please attach the dump in your response. For convenience you may use our fwdump-docker if you want to avoid compiling this tool from source: https://github.com/3mdeb/fwdump-docker
Command to use: |docker run --rm --privileged -it -v $PWD:/home/fwdump 3mdeb/fwdump-docker:1.1.0 getlogs|
Simply superiotool.log from the archive will suffice.
best regards lain
Best regards,