Yes I saw ticket #7 after I sent that. Based on a hint that Uniflash works, I punk'd the GPIO enable for this MSI MS-6337, and now it works!
Uniflash was working, but doesn't support SST49LF016C
dev=pci_dev_find(0x8086, 0x2440); // ICH2 ISA bridge base=pci_read_word(dev,0x58) & 0x7fc0; val=inb(base+0xe); val |= 0x80; outb(val, base+0xe);
Regards,
Jeremy
On Tue, 2007-05-15 at 23:26 +0200, Uwe Hermann wrote:
On Tue, May 15, 2007 at 04:06:03PM -0400, Jeremy Jackson wrote:
Ok it seems panic *isn't* the best approach after all:
After dusting off an Intel 82815 + 82801BA (ICH2) based board, and reading the datasheets, I find I can get "flashrom" can detect SST49LF016C as follows:
Vendor BIOS sets southbridge ICH2 for a 1MB decode, with all but the top block having seemingly random IDSEL settings. I corrected this:
I can't help much with the other stuff, but flashrom not being able to write on ICH2 is a known problem, I experienced the same.
http://tracker.linuxbios.org/trac/LinuxBIOS/ticket/7
I didn't find the time to look further into the issue, yet.
Uwe.
linuxbios mailing list linuxbios@linuxbios.org http://www.linuxbios.org/mailman/listinfo/linuxbios