On 12.05.2008 17:04, ron minnich wrote:
On Mon, May 12, 2008 at 6:59 AM, Tom Sylla tsylla@gmail.com wrote:
This tool is a bit useful already. Can you run it on the alix1c's tinybios (or whatever works best on the alix)? Do all ports of your USB card work on alix with that BIOS? At a minumum, you need to check and make sure that INTs A-D are *really* GPIOs 0, 7, 12, and 13. (and as Peter said, you need to verify how they are hooked up to the slot)
verified. One bit of verification is that eth0 on schematic matches up with eth0 in the $PIR table.
i'd like to run under tinybios and will try this once I trust the tool. or someone can run it for me -- my FLASH on the LPC died.
In theory, the vendor BIOS can be loaded from the dongle. http://www.pcengines.ch/file/alixbio3.zip has the most recent alix.1c BIOS.
Regards, Carl-Daniel