[coreboot] [commit] r5147 - trunk/src/mainboard/msi/ms7135

[repository service]

Author: oxygene
Date: Tue Feb 23 11:18:43 2010
New Revision: 5147
URL: http://tracker.coreboot.org/trac/coreboot/changeset/5147

Log:
Adjust msi/ms7135 DCACHE_RAM_* config to previous 32KiB values,
4KiB is not enough to work.

Additionally, modify the device tree so that the undocumented LDN 6
is ignored by the resource allocator, and while here, assign the
parallel port DRQ, hardware monitor IRQ and drop NIC MAC address
on SMBus EEPROM hint, the ms7135 doesn't have such hardware.

Signed-off-by: Jonathan A. Kollasch 
Acked-by: Patrick Georgi

Modified:
   trunk/src/mainboard/msi/ms7135/Kconfig
   trunk/src/mainboard/msi/ms7135/devicetree.cb

Modified: trunk/src/mainboard/msi/ms7135/Kconfig
==============================================================================
--- trunk/src/mainboard/msi/ms7135/Kconfig	Mon Feb 22 17:41:49 2010	(r5146)
+++ trunk/src/mainboard/msi/ms7135/Kconfig	Tue Feb 23 11:18:43 2010	(r5147)
@@ -109,10 +109,10 @@

config DCACHE_RAM_BASE
    hex
-	default 0xcf000
+	default 0xc8000
    depends on BOARD_MSI_MS7135

config DCACHE_RAM_SIZE
    hex
-	default 0x1000
+	default 0x8000
    depends on BOARD_MSI_MS7135

Modified: trunk/src/mainboard/msi/ms7135/devicetree.cb
==============================================================================
--- trunk/src/mainboard/msi/ms7135/devicetree.cb	Mon Feb 22 17:41:49 2010	(r5146)
+++ trunk/src/mainboard/msi/ms7135/devicetree.cb	Tue Feb 23 11:18:43 2010	(r5147)
@@ -21,6 +21,7 @@
               device pnp 4e.1 on		# Parallel port
                 io 0x60 = 0x378
                 irq 0x70 = 7
+                drq 0x74 = 3
               end
               device pnp 4e.2 on		# Com1
                 io 0x60 = 0x3f8
@@ -36,13 +37,14 @@
                 irq 0x70 = 1
                 irq 0x72 = 12
               end
+              device pnp 4e.6 off end		# XXX keep allocator happy
               device pnp 4e.7 off end		# Game, MIDI, GPIO 1, GPIO 5
               device pnp 4e.8 off end		# GPIO 2
               device pnp 4e.9 off end		# GPIO 3, GPIO 4
               device pnp 4e.a off end		# ACPI
               device pnp 4e.b on		# Hardware monitor
                 io 0x60 = 0x290
-                irq 0x70 = 0
+                irq 0x70 = 5
               end
             end
           end
@@ -64,8 +66,6 @@
           register "ide1_enable" = "1"
           register "sata0_enable" = "1"
           register "sata1_enable" = "1"
-          # register "mac_eeprom_smbus" = "3"
-          # register "mac_eeprom_addr" = "0x51"
         end
       end
       device pci 18.1 on end