miro:~/sysinfo# msrtool > msrtool.log msrtool 4091 Detected target K8: AMD K8 Family
Unable to detect the current operating system! On Linux, please do 'modprobe msr' and retry. Please send a report or patch to coreboot@coreboot.org. Thanks for your help!
miro:~/sysinfo# modprobe msr WARNING: All config files need .conf: /etc/modprobe.d/kqemu, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/OLD_oss-compat, it will be ignored in a future release. WARNING: All config files need .conf: /etc/modprobe.d/OLD_linux-sound-base_noOSS, it will be ignored in a future release.
miro:~/sysinfo# msrtool > msrtool.log msrtool 4091 Detected system linux: Linux with /dev/cpu/*/msr Detected target K8: AMD K8 Family
Debian Linux OS: Linux miro 3.2.0-1-amd64 #1 SMP Sun Feb 5 15:17:15 UTC 2012 x86_64 GNU/Linux
miro:~/sysinfo# cat msrtool.log syntax: msrtool [-hvqrkl] [-c cpu] [-m system] [-t target ...] [-i addr=hi[:]lo] | [-s file] | [-d [:]file] | addr... -h show this help text -v be verbose -q be quiet (overrides -v) -r include [Reserved] values -k list all known systems and targets -l list MSRs and bit fields for current target(s) (-kl for ALL targets!) -c access MSRs on the specified CPU, default=0 -m force a system, e.g: -m linux -t force a target, can be used multiple times, e.g: -t geodelx -t cs5536 -i immediate mode decode hex addr=hi:lo for the target without reading hw value e.g: -i 4c00000f=f2f100ff56960004 -s stream mode read one MSR address per line and append current hw value to the line use the filename - for stdin/stdout using -l -s ignores input and will output all MSRs with values -d diff mode read one address and value per line and compare with current hw value, printing differences to stdout. use the filename - to read from stdin use :file or :- to reverse diff, normally hw values are considered new addr.. direct mode, read and decode values for the given MSR address(es)
No mode or address(es) specified!