On board and add-on card, there is some difference.
I just noticed Ati ragexl init in LinuxBIOS only support Onboard device. And does not support addon card.
But the ragexl init in Kernel can support both.
Regards
YH
-----Original Message----- From: Stefan Reinauer [mailto:stepan@openbios.org] Sent: Friday, October 01, 2004 10:59 AM To: Richard Smith Cc: linuxbios@clustermatic.org Subject: Re: PCI guru consultant needed
* Richard Smith rsmith@bitworks.com [041001 18:47]:
Somehow the SDRAM inside the M1 chip is failing to initialize properly. The video output has all the right VSYNC and HSYNC for the 800x600 mode I setup but a black screen and a large square block for the cursor. If I exit X and try to write/read a value into video ram I get garbage back. This works on the Ausu P2B.
Wild guess: - Timing issues? - missing bridge initialization?
Stefan
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios