On board and add-on card, there is some difference.
I just noticed
Ati ragexl init in LinuxBIOS only support Onboard device. And does not
support addon card.
But the ragexl init in Kernel can support both.
From: Stefan Reinauer [mailto:email@example.com]
Sent: Friday, October 01, 2004 10:59 AM
To: Richard Smith
Subject: Re: PCI guru consultant needed
* Richard Smith <rsmith(a)bitworks.com> [041001 18:47]:
Somehow the SDRAM inside the M1 chip is failing to
The video output has all the right VSYNC and HSYNC for the 800x600
mode I setup but a black screen and a large square block for the cursor.
If I exit X and try to write/read a value into video ram I get garbage
back. This works on the Ausu P2B.
- Timing issues?
- missing bridge initialization?
Linuxbios mailing list