New iteration.
- Clean up Geode companion chip CS5536 code. - Eliminate a few redundant dev_find_pci_device() calls. - Fix a compile warning intruduced in r689.
This should be an equivalence transformation.
Build tested on norwich, db800, alix.1c, alix.2c3, dbe62, dbe61.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv3-tmp3/southbridge/amd/cs5536/cs5536.c =================================================================== --- LinuxBIOSv3-tmp3/southbridge/amd/cs5536/cs5536.c (Revision 691) +++ LinuxBIOSv3-tmp3/southbridge/amd/cs5536/cs5536.c (Arbeitskopie) @@ -240,16 +240,13 @@ * * @param sb Southbridge config structure. */ -static void uarts_init(struct southbridge_amd_cs5536_dts_config *sb) +static void uarts_init(struct southbridge_amd_cs5536_dts_config *sb, + struct device *dev) { struct msr msr; u16 addr = 0; u32 gpio_addr; - struct device *dev;
- dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0); - gpio_addr = pci_read_config32(dev, PCI_BASE_ADDRESS_1); gpio_addr &= ~1; /* Clear I/O bit */ printk(BIOS_DEBUG, "GPIO_ADDR: %08X\n", gpio_addr); @@ -419,11 +416,11 @@ { u32 *bar; struct msr msr; - struct device *dev; + struct device *ehci_dev, *otg_dev, *udc_dev;
- dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, + ehci_dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHCI, 0); - if (dev) { + if (ehci_dev) { /* Serial short detect enable */ msr = rdmsr(USB2_SB_GLD_MSR_CONF); msr.hi |= USB2_UPPER_SSDEN_SET; @@ -432,7 +429,7 @@ /* Write to clear diag register. */ wrmsr(USB2_SB_GLD_MSR_DIAG, rdmsr(USB2_SB_GLD_MSR_DIAG));
- bar = (u32 *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); + bar = (u32 *) pci_read_config32(ehci_dev, PCI_BASE_ADDRESS_0);
/* Make HCCPARAMS writable. */ *(bar + IPREG04) |= USB_HCCPW_SET; @@ -441,10 +438,10 @@ *(bar + HCCPARAMS) = 0x00005012; }
- dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, + otg_dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) { - bar = (u32 *) pci_read_config32(dev, PCI_BASE_ADDRESS_0); + if (otg_dev) { + bar = (u32 *) pci_read_config32(otg_dev, PCI_BASE_ADDRESS_0);
printk(BIOS_DEBUG, "UOCMUX is %x\n", *(bar + UOCMUX));
@@ -470,6 +467,8 @@
}
+ udc_dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_CS5536_UDC, 0); /* PBz#6466: If the UOC(OTG) device, port 4, is configured as a * device, then perform the following sequence: * - Set SD bit in DEVCTRL udc register @@ -477,24 +476,19 @@ * - Set APU bit in uoc register */ if (sb->enable_USBP4_device) { - dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_UDC, 0); - if (dev) { - bar = (u32 *)pci_read_config32(dev, PCI_BASE_ADDRESS_0); + if (udc_dev) { + bar = (u32 *)pci_read_config32(udc_dev, PCI_BASE_ADDRESS_0); *(bar + UDCDEVCTL) |= UDC_SD_SET; }
- dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) { - bar = (u32 *)pci_read_config32(dev, PCI_BASE_ADDRESS_0); + if (otg_dev) { + bar = (u32 *)pci_read_config32(otg_dev, PCI_BASE_ADDRESS_0); *(bar + UOCCTL) |= PADEN_SET; *(bar + UOCCAP) |= APU_SET; + printk(BIOS_DEBUG, "UOCCTL is %x\n", *(bar + UOCCTL)); } }
- printk(BIOS_DEBUG, "UOCCTL is %x\n", *(bar + UOCCTL)); - /* Disable virtual PCI UDC and OTG headers. The kernel never * sees a header for this device. It used to provide an OS * visible device, but that was defeatured. There are still @@ -506,15 +500,11 @@ * device ID PCI_DEVICE_ID_AMD_CS5536_OTG, but it is hidden * when 0xDEADBEEF is written to config space register 0x7C. */ - dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_UDC, 0); - if (dev) - pci_write_config32(dev, 0x7C, 0xDEADBEEF); + if (udc_dev) + pci_write_config32(udc_dev, 0x7C, 0xDEADBEEF);
- dev = dev_find_pci_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_OTG, 0); - if (dev) - pci_write_config32(dev, 0x7C, 0xDEADBEEF); + if (otg_dev) + pci_write_config32(otg_dev, 0x7C, 0xDEADBEEF); }
/** @@ -659,7 +649,7 @@
setup_i8259(); lpc_init(sb); - uarts_init(sb); + uarts_init(sb, dev);
if (sb->enable_gpio_int_route) { printk(BIOS_SPEW, "cs5536: call vr_write\n");
Regards, Carl-Daniel