Dear Corey,
I used manually partition, only /dev/sda1 for root '/' and /dev/sda2 for swap, no lvm. Thanks for your idea. :)
Morgan
----- Original Message ----- From: "Corey Osgood" corey.osgood@gmail.com To: "Morgan Tsai" my_tsai@sis.com Cc: "ron minnich" rminnich@gmail.com; "Uwe Hermann" uwe@hermann-uwe.de; "Russell Whitaker" russ@ashlandhome.net; "Dennis Chang /SiS" ktchang@sis.com; "Eric Lin" ericlin@sis.com; linuxbios@linuxbios.org Sent: Friday, October 12, 2007 4:22 PM Subject: Re: [LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK
Morgan Tsai wrote:
Dear ron,
I got a problem. When I connect an existing FC6 hdd on GA-2761GXDK, the message is:
Jumping to boot code at 0x10dbf4 FILO version 0.5 (morgan@cvs.sis.com) Mon Oct. 8 16:42:41 CST 2007 Press <Enter> for default menu.lst (hde1:/boot/grub/menu.lst), or <Esc> for prom pt... timed out menu: hde1:/boot/grub/menu.lst hde: LBA 8622MB: ST38410A Mounted ext2fs Attempt to read out of device/partition File not found Press any key to continue. .................
I had installed Fedora 6 with another board, and the original root partition is /dev/sda1 Any idea? Thanks!
Doesn't fedora's installer usually like to make a seperate /boot partition? If so, that's where you'll have to point FILO to. I don't think FILO can handle lvm either (another default "feature" last time I tried fedora), but I could be wrong.
-Corey