r4534 introduced devicetree.cb in every mainboard directory, and 100% of that content was extracted from Config.lb in the same directory without eliminating the original contents.
This patch fixes the dupliaction by using include statements. So far, I only tackled amd/dbm690t because it's the only target I can run a build+boot test for. Someone needs to fix the other 110 boards in the tree.
Boot tested.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb (Revision 4605) +++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/Config.lb (Arbeitskopie) @@ -134,132 +134,4 @@ config chip.h
#The variables belong to mainboard are defined here. - -#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) -#Define vga_rom_address = 0xfff0000 -#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) -#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, -# 1: the system allows a PCIE link to be established on Dev2 or Dev3. -#Define gfx_dual_slot, 0: single slot, 1: dual slot -#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable -#Define gfx_tmds, 0: didn't support TMDS, 1: support -#Define gfx_compliance, 0: didn't support compliance, 1: support -#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration -#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 -chip northbridge/amd/amdk8/root_complex - device apic_cluster 0 on - chip cpu/amd/socket_S1G1 - device apic 0 on end - end - end - device pci_domain 0 on - chip northbridge/amd/amdk8 - device pci 18.0 on # southbridge - chip southbridge/amd/rs690 - device pci 0.0 on end # HT 0x7910 - device pci 1.0 on # Internal Graphics P2P bridge 0x7912 - chip drivers/pci/onboard - device pci 5.0 on end # Internal Graphics 0x791F - register "rom_address" = "0xfff00000" - end - end - device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913 - device pci 3.0 off end # PCIE P2P bridge 0x791b - device pci 4.0 on end # PCIE P2P bridge 0x7914 - device pci 5.0 on end # PCIE P2P bridge 0x7915 - device pci 6.0 on end # PCIE P2P bridge 0x7916 - device pci 7.0 on end # PCIE P2P bridge 0x7917 - device pci 8.0 off end # NB/SB Link P2P bridge - register "vga_rom_address" = "0xfff00000" - register "gpp_configuration" = "4" - register "port_enable" = "0xfc" - register "gfx_dev2_dev3" = "1" - register "gfx_dual_slot" = "0" - register "gfx_lane_reversal" = "0" - register "gfx_tmds" = "0" - register "gfx_compliance" = "0" - register "gfx_reconfiguration" = "1" - register "gfx_link_width" = "0" - end - chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus - device pci 12.0 on end # SATA 0x4380 - device pci 13.0 on end # USB 0x4387 - device pci 13.1 on end # USB 0x4388 - device pci 13.2 on end # USB 0x4389 - device pci 13.3 on end # USB 0x438a - device pci 13.4 on end # USB 0x438b - device pci 13.5 on end # USB 2 0x4386 - device pci 14.0 on # SM 0x4385 - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic #dimm 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic #dimm 0-1-1 - device i2c 53 on end - end - end # SM - device pci 14.1 on end # IDE 0x438c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x438d - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 off end # EC - device pnp 2e.5 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # Mouse - irq 0x70 = 12 - end - device pnp 2e.7 off # GPIO, must be closed for unresolved reason. - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # GAME - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end #superio/ite/it8712f - end #LPC - device pci 14.4 on end # PCI 0x4384 - device pci 14.5 on end # ACI 0x4382 - device pci 14.6 on end # MCI 0x438e - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "hda_viddid" = "0x10ec0882" - end #southbridge/amd/sb600 - end # device pci 18.0 - - device pci 18.0 on end - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end #northbridge/amd/amdk8 - end #pci_domain -end #northbridge/amd/amdk8/root_complex - +include /mainboard/amd/dbm690t/devicetree.cb Index: LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb =================================================================== --- LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb (Revision 4605) +++ LinuxBIOSv2-asus_m2a-vm/src/mainboard/amd/dbm690t/devicetree.cb (Arbeitskopie) @@ -1,3 +1,14 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define vga_rom_address = 0xfff0000 +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 chip northbridge/amd/amdk8/root_complex device apic_cluster 0 on chip cpu/amd/socket_S1G1