Dear coreboot readers!
This is the automatic build system of coreboot.
The developer "uwe" checked in revision 4365 to the coreboot repository. This caused the following changes:
Change Log: Convert the MSI MS-6178 board to CBFS. Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range: [0x00000000000f0000, 0x0000000000100000) Ram areas [0x0000000000000000, 0x0000000000001000) Reserved [0x0000000000001000, 0x00000000000a0000) RAM [0x0000000000100000, 0x000000000fff0000) RAM [0x000000000fff0000, 0x0000000010000000) Reserved SELFBOOT RETURNED! Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024); + ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine, for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Myles Watson mylesgw@gmail.com
Build Log: Compilation of embeddedplanet:ep405pc is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4365&device=ep405pc&... Compilation of motorola:sandpointx3_altimus_mpc7410 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4365&device=sandpointx3... Compilation of totalimpact:briq is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4365&device=briq&ve... Compilation of via:epia-m700 is still broken See the error log at http://qa.coreboot.org/log_buildbrd.php?revision=4365&device=epia-m700&a...
If something broke during this checkin please be a pain in uwe's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, coreboot automatic build system