On Tue, May 06, 2003 at 02:39:09PM -0400, Adam Sulmicki wrote:
grumbe. This code should correct initalization as per ATA-3 specs.
what hard disk is this?
It's a 20GB drive from Fujitsu.
$ sudo hdparm -i /dev/hda
/dev/hda:
Model=FUJITSU MPG3204AT E, FwRev=80B5, SerialNo=VH01P0C02R02 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40031712 IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 AdvancedPM=yes: disabled (255) WriteCache=enabled Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 1 2 3 4 5
I'm thinking to replace this with a 2.5" drive. Should I avoid Fujitsu next time? :)