Author: rminnich Date: 2009-04-20 17:36:57 +0200 (Mon, 20 Apr 2009) New Revision: 4143
Modified: trunk/coreboot-v2/documentation/LinuxBIOS-AMD64.tex Log: Continuing the slow doc-o update Signed-off-by: Ronald G. Minnich rminnich@gmail.com Acked-by: Ronald G. Minnich rminnich@gmail.com
Modified: trunk/coreboot-v2/documentation/LinuxBIOS-AMD64.tex =================================================================== --- trunk/coreboot-v2/documentation/LinuxBIOS-AMD64.tex 2009-04-20 12:38:17 UTC (rev 4142) +++ trunk/coreboot-v2/documentation/LinuxBIOS-AMD64.tex 2009-04-20 15:36:57 UTC (rev 4143) @@ -1554,7 +1554,7 @@
A coreboot rom file consists of one or more \textit{images}. All images consist of a part that runs in ROM, and a part that runs in RAM. The RAM can be in compressed form and is decompressed when needed by the ROM code. The main function of the ROM code is to get memory working. Both ROM and RAM consist of a very small amount of assembly code and mostly C code.
-\subsection{romcc images} +\subsection{romcc images (from emulation/qemu)} ROMCC images are so-called because C code for the ROM part is compiled with romcc. romcc is an optimizing C compiler which compiles one, and only one file; to get more than one file, one must include the C code via include statements. The main ROM code .c file is usually called auto.c. \subsubsection{how it is built} @@ -1596,7 +1596,7 @@ Each image (normal or fallback) is built completely independently and does not get linked to the other. They are assembled into one ROM image by the (soon to be deprecated) buildrom tool, or by the cbfs tool.
\subsubsection{boot sequence} -We boot and start at fffffff0. We then jump to the entry point at _start. Protected_start does some machine init and an lgdt and jumps to __protected_start, at which point we are in protected mode. The code does a bit more machine setup and then starts executing the romcc code. +We boot and start at fffffff0. We then jump to the entry point at _start. _start does some machine init and an lgdt and jumps to __protected_start, at which point we are in protected mode. The code does a bit more machine setup and then starts executing the romcc code.
If fallback has been built in, some setup needs to be done. On some machines, it is extensive. Full rom decoding must be enabled. This may in turn require additional PCI setup to enable decoding to be enabled (!). To decided which image to use, hardware registers (cold boot on the Opteron) or CMOS are checked. Finally, once the image to use has been decided, a jmp is performed, viz: \begin{verbatim} @@ -1623,18 +1623,36 @@ ; \end{verbatim} How does the fallback image get the symbol for normal entry? Via magic in the ldscript.ld -- remember, the images are not linked to each other. -\subsection{car images} +Finally, we can see this in the Config.lb for most mainboards: +\begin{verbatim} +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end +\end{verbatim} +What does this mean? the non-fallback image has a 32-bit entry point; fallback has a 16-bit entry point. The reason for this is that some code from fallback always runs, so as to pick fallback or normal; but the normal is always called from 32-bit code. +\subsection{car images (from lippert/roadrunner-lx)} +CAR images in their simplest form are modified romcc images. The file is usually cache_as_ram_auto.c. C inclusion is still used. The main difference is in the build sequence. The compiler command line is a very slight changed: instead of using romcc to generate an auto.inc include file, gcc us used. Then, two perl scripts are used to rename the .text and .data sections to .rom.text and .rom.data respectively. \subsubsection{how it is built} +The build is almost identical to the romcc build. Since the auto.inc file exists, it can be included as before. The crt0_includes.h file has one addition: a file that enables CAR, in this case it is \textit{src/cpu/amd/model_lx/cache_as_ram.inc}. \subsubsection{layout} +No significant change from romcc code. \subsubsection{boot sequence} -We boot and start at fffffff0. We then jump to the entry point at protected_start (a clear misnomer, since we're not in protected mode at that -point). Protected_start does an lgdt and jumps to __protected_start, at which point we are in protected mode. +No significant change from romcc code, except that the CAR code has to set up a stack.
-\subsection{car + config_use_init images} +\subsection{car + CONFIG_USE_INIT images} \subsubsection{how it is built} \subsubsection{layout} \subsubsection{boot sequence} +We boot and start at fffffff0. We then jump to the entry point at protected_start (a clear misnomer, since we're not in protected mode at that +point). Protected_start does an lgdt and jumps to __protected_start, at which point we are in protected mode.
+\subsection{car + CONFIG_USE_PRINTK_IN_CAR images} +When CONFIG_USE_PRINTK_IN_CAR is set, the CAR code can use printk instead of the primitive print functions. + \subsection{failover}
%