Re: [coreboot] DL145G3

[Uwe Hermann]

Hi,

On Fri, Mar 27, 2009 at 01:11:08PM +0100, Mondrian Nuessle wrote:
> as someone already pointed out, we need to enable flashing first on the board using a GPIO pin.
> I have attached a patch for flashrom that enables flashing on the HP DL145 G3. I tested it on the DL145 I have here.
>
> Please specify the board on the commandline, like in
> # ./flashrom -m "hp:dl145_g3" -E
>
> The patch is probably not ready for primetime, maybe someone can review it?

I can't test it due to lack of hardware, but otherwise the code looks
OK. Please add your Signed-off-by to all patches you send, though.

Uwe.