Bendany,
New 810 requires mii to be enabled. You need the following images.
DOC cwlinux_810lmr_lite-mii.lb.tar.gz or cwlinux_810lmr_mb-mii.lb.tar.gz
flash m810-etherboot-vt6103.rom - network m810-ide-vt6103.rom - ide
-Andrew
On Tue, Nov 26, 2002 at 11:38:22AM -0800, bendany wrote:
I have bought a mainboard K7SEM, and The mainboard also have a CPU in it, duron 1000+, and I follow the m810 HOWTO to burn a DOC chip, and reset, nothing happen. and I also download the LinuxBIOS SDK from the cwlinux.com , burn the k7sem into the DOC, i seem the LinuxBIOS has write into the DOC, i can mount the fs in the DOC, and when I turn reset key, nothing happen too finally, I download the m810-etherboot.rom from cwlinux.com ,using a external chip burnner ,burn it into the original BIOS chip, and it works, I can take some boot message from the serial console, but still does not work, the log like this:
<abort> Boot from (N)etwork or from (L)ocal? N Probing...[SIS900]Found SIS900 ROM address 0x0000 Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000
sis900_probe: MAC addr 00:07:95:2B:50:CE at ioaddr 0X2000 sis900_probe: Vendor:0X1039 Device:0X0900 sis900_probe: No MII transceivers found! No adapter found
<sleep>
How can I make my mainboard work? Need help!
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡bendany ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡bendany@mistdl.com ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2002-11-26
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios