Does it some differences between K7SEM V1.0c & V3.0?

[bendany]

I have bought a mainboard K7SEM, and The mainboard also have a CPU in it,
duron 1000+, and I follow the m810 HOWTO to burn a DOC chip, and reset,
nothing happen. 
and I also download the LinuxBIOS SDK from the cwlinux.com , burn the k7sem
into the DOC, i seem the LinuxBIOS has write into the DOC, i can mount the 
fs in the DOC, and when I turn reset key, nothing happen too
finally, I download the m810-etherboot.rom from cwlinux.com ,using a external 
chip burnner ,burn it into the original BIOS chip, and it works, I can take 
some boot message from the serial console, but still does not work,
the log like this:

<abort>
Boot from (N)etwork or from (L)ocal? N
Probing...[SIS900]Found SIS900 ROM address 0x0000
Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000

sis900_probe: MAC addr 00:07:95:2B:50:CE at ioaddr 0X2000
sis900_probe: Vendor:0X1039 Device:0X0900
sis900_probe: No MII transceivers found!
No adapter found
<sleep>

How can I make my mainboard work? Need help!




¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡bendany
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡[e-mail]
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2002-11-26

[Andrew Ip]

Bendany,

	New 810 requires mii to be enabled.  You need the following images.

DOC
cwlinux_810lmr_lite-mii.lb.tar.gz
or
cwlinux_810lmr_mb-mii.lb.tar.gz

flash
m810-etherboot-vt6103.rom - network
m810-ide-vt6103.rom - ide

-Andrew

On Tue, Nov 26, 2002 at 11:38:22AM -0800, bendany wrote:
> I have bought a mainboard K7SEM, and The mainboard also have a CPU in it,
> duron 1000+, and I follow the m810 HOWTO to burn a DOC chip, and reset,
> nothing happen. 
> and I also download the LinuxBIOS SDK from the cwlinux.com , burn the k7sem
> into the DOC, i seem the LinuxBIOS has write into the DOC, i can mount the 
> fs in the DOC, and when I turn reset key, nothing happen too
> finally, I download the m810-etherboot.rom from cwlinux.com ,using a external 
> chip burnner ,burn it into the original BIOS chip, and it works, I can take 
> some boot message from the serial console, but still does not work,
> the log like this:
>
> <abort>
> Boot from (N)etwork or from (L)ocal? N
> Probing...[SIS900]Found SIS900 ROM address 0x0000
> Found SIS 85C503/5513 PCI to ISA bridge ROM address 0x0000
>
> sis900_probe: MAC addr 00:07:95:2B:50:CE at ioaddr 0X2000
> sis900_probe: Vendor:0X1039 Device:0X0900
> sis900_probe: No MII transceivers found!
> No adapter found
> <sleep>
>
> How can I make my mainboard work? Need help!
>
> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡bendany
> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡[e-mail]
> ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2002-11-26
>
> _______________________________________________
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios