Sven Schnelle (svens@stackframe.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/1139
-gerrit
commit 55ac2d7026e83b56cdc03a1738ba83685c740035 Author: Sven Schnelle svens@stackframe.org Date: Sun Jun 17 10:32:55 2012 +0200
Use broadcast SIPI to startup siblings
Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle svens@stackframe.org --- src/arch/x86/include/arch/cpu.h | 24 -- src/arch/x86/lib/cpu.c | 30 ++- src/cpu/intel/hyperthreading/Makefile.inc | 1 - src/cpu/intel/hyperthreading/intel_sibling.c | 73 ------- src/cpu/intel/model_1067x/model_1067x_init.c | 4 - src/cpu/intel/model_106cx/model_106cx_init.c | 4 - src/cpu/intel/model_206ax/acpi.c | 9 +- src/cpu/intel/model_206ax/model_206ax_init.c | 55 ----- src/cpu/intel/model_6ex/model_6ex_init.c | 3 - src/cpu/intel/model_6fx/model_6fx_init.c | 3 - src/cpu/intel/model_f2x/model_f2x_init.c | 4 - src/cpu/intel/model_f3x/model_f3x_init.c | 4 - src/cpu/intel/model_f4x/model_f4x_init.c | 4 - src/cpu/x86/lapic/lapic_cpu_init.c | 295 ++++++-------------------- src/cpu/x86/lapic/secondary.S | 17 ++- src/cpu/x86/pae/pgtbl.c | 3 +- src/drivers/i2c/w83795/w83795.c | 5 +- src/include/cpu/cpu.h | 2 +- 18 files changed, 106 insertions(+), 434 deletions(-)
diff --git a/src/arch/x86/include/arch/cpu.h b/src/arch/x86/include/arch/cpu.h index 0dc92fb..0fe5ea5 100644 --- a/src/arch/x86/include/arch/cpu.h +++ b/src/arch/x86/include/arch/cpu.h @@ -158,30 +158,6 @@ struct cpu_driver { struct device; struct cpu_driver *find_cpu_driver(struct device *cpu);
-struct cpu_info { - device_t cpu; - unsigned long index; -}; - -static inline struct cpu_info *cpu_info(void) -{ - struct cpu_info *ci; - __asm__("andl %%esp,%0; " - "orl %2, %0 " - :"=r" (ci) - : "0" (~(CONFIG_STACK_SIZE - 1)), - "r" (CONFIG_STACK_SIZE - sizeof(struct cpu_info)) - ); - return ci; -} - -static inline unsigned long cpu_index(void) -{ - struct cpu_info *ci; - ci = cpu_info(); - return ci->index; -} - struct cpuinfo_x86 { uint8_t x86; /* CPU family */ uint8_t x86_vendor; /* CPU vendor */ diff --git a/src/arch/x86/lib/cpu.c b/src/arch/x86/lib/cpu.c index 98ede06..f63a67b 100644 --- a/src/arch/x86/lib/cpu.c +++ b/src/arch/x86/lib/cpu.c @@ -9,6 +9,7 @@ #include <device/path.h> #include <device/device.h> #include <smp/spinlock.h> +#include <cpu/x86/lapic.h>
/* Standard macro to see if a specific flag is changeable */ static inline int flag_is_changeable_p(uint32_t flag) @@ -234,7 +235,11 @@ static void set_cpu_ops(struct device *cpu) cpu->ops = driver ? driver->ops : NULL; }
-void cpu_initialize(void) +#if CONFIG_SMP +static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; +#endif + +void cpu_initialize(struct bus *cpu_bus) { /* Because we busy wait at the printk spinlock. * It is important to keep the number of printed messages @@ -242,17 +247,21 @@ void cpu_initialize(void) * disabled. */ struct device *cpu; - struct cpu_info *info; struct cpuinfo_x86 c; + struct device_path cpu_path; + unsigned char id = lapicid();
- info = cpu_info(); + cpu_path.type = DEVICE_PATH_APIC; + cpu_path.apic.apic_id = id;
- printk(BIOS_INFO, "Initializing CPU #%ld\n", info->index); - - cpu = info->cpu; - if (!cpu) { - die("CPU: missing cpu device structure"); - } +#if CONFIG_SMP + spin_lock(&start_cpu_lock); +#endif + cpu = alloc_find_dev(cpu_bus, &cpu_path); +#if CONFIG_SMP + spin_unlock(&start_cpu_lock); +#endif + printk(BIOS_DEBUG, "Initializing CPU #%d\n", id);
/* Find what type of cpu we are dealing with */ identify_cpu(cpu); @@ -276,7 +285,6 @@ void cpu_initialize(void) printk(BIOS_DEBUG, "Using generic cpu ops (good)\n"); }
- /* Initialize the cpu */ if (cpu->ops && cpu->ops->init) { cpu->enabled = 1; @@ -284,7 +292,7 @@ void cpu_initialize(void) cpu->ops->init(cpu); }
- printk(BIOS_INFO, "CPU #%ld initialized\n", info->index); + printk(BIOS_INFO, "CPU #%d initialized\n", id);
return; } diff --git a/src/cpu/intel/hyperthreading/Makefile.inc b/src/cpu/intel/hyperthreading/Makefile.inc deleted file mode 100644 index 8adbad9..0000000 --- a/src/cpu/intel/hyperthreading/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -ramstage-y += intel_sibling.c diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c deleted file mode 100644 index 2d2e105..0000000 --- a/src/cpu/intel/hyperthreading/intel_sibling.c +++ /dev/null @@ -1,73 +0,0 @@ -#include <console/console.h> -#include <cpu/cpu.h> -#include <cpu/x86/lapic.h> -#include <cpu/intel/hyperthreading.h> -#include <device/device.h> -#include <pc80/mc146818rtc.h> -#include <smp/spinlock.h> -#include <assert.h> - -#if !CONFIG_SERIAL_CPU_INIT -#error Intel hyper-threading requires serialized cpu init -#endif - -static int first_time = 1; -static int disable_siblings = !CONFIG_LOGICAL_CPUS; - -void intel_sibling_init(device_t cpu) -{ - unsigned i, siblings; - struct cpuid_result result; - - /* On the bootstrap processor see if I want sibling cpus enabled */ - if (first_time) { - first_time = 0; - get_option(&disable_siblings, "hyper_threading"); - } - result = cpuid(1); - /* Is hyperthreading supported */ - if (!(result.edx & (1 << 28))) { - return; - } - /* See how many sibling cpus we have */ - siblings = (result.ebx >> 16) & 0xff; - if (siblings < 1) { - siblings = 1; - } - - printk(BIOS_DEBUG, "CPU: %u %d siblings\n", - cpu->path.apic.apic_id, - siblings); - - /* See if I am a sibling cpu */ - if (cpu->path.apic.apic_id & (siblings -1)) { - if (disable_siblings) { - cpu->enabled = 0; - } - return; - } - - /* I am the primary cpu start up my siblings */ - for(i = 1; i < siblings; i++) { - struct device_path cpu_path; - device_t new; - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = cpu->path.apic.apic_id + i; - - - /* Allocate new cpu device structure iff sibling CPU - * was not in static device tree. - */ - new = alloc_find_dev(cpu->bus, &cpu_path); - - if (!new) { - continue; - } - - printk(BIOS_DEBUG, "CPU: %u has sibling %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - } -} - diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c index c6d716d9..ddd1381 100644 --- a/src/cpu/intel/model_1067x/model_1067x_init.c +++ b/src/cpu/intel/model_1067x/model_1067x_init.c @@ -29,7 +29,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h>
@@ -221,9 +220,6 @@ static void model_1067x_init(device_t cpu)
/* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c index 4bf2924..8d2ef3d 100644 --- a/src/cpu/intel/model_106cx/model_106cx_init.c +++ b/src/cpu/intel/model_106cx/model_106cx_init.c @@ -27,7 +27,6 @@ #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> #include <cpu/intel/speedstep.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h> #include <cpu/x86/name.h> #include <usbdebug.h> @@ -178,9 +177,6 @@ static void model_106cx_init(device_t cpu) configure_misc();
/* TODO: PIC thermal sensor control */ - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_206ax/acpi.c b/src/cpu/intel/model_206ax/acpi.c index 6153174..dea23e7 100644 --- a/src/cpu/intel/model_206ax/acpi.c +++ b/src/cpu/intel/model_206ax/acpi.c @@ -26,6 +26,7 @@ #include <arch/acpigen.h> #include <arch/cpu.h> #include <cpu/x86/msr.h> +#include <cpu/x86/lapic.h> #include <cpu/intel/acpi.h> #include <cpu/intel/speedstep.h> #include <cpu/intel/turbo.h> @@ -88,8 +89,8 @@ static int generate_cstate_entries(acpi_cstate_t *cstates,
static int generate_C_state_entries(void) { - struct cpu_info *info; struct cpu_driver *cpu; + struct device *cpu_dev; int len, lenif; device_t lapic; struct cpu_intel_model_206ax_config *conf = NULL; @@ -103,10 +104,10 @@ static int generate_C_state_entries(void) return 0;
/* Find CPU map of supported C-states */ - info = cpu_info(); - if (!info) + cpu_dev = dev_find_lapic(lapicid()); + if (!cpu_dev) return 0; - cpu = find_cpu_driver(info->cpu); + cpu = find_cpu_driver(cpu_dev); if (!cpu || !cpu->cstates) return 0;
diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c index 874ce4d..d60c237 100644 --- a/src/cpu/intel/model_206ax/model_206ax_init.c +++ b/src/cpu/intel/model_206ax/model_206ax_init.c @@ -414,58 +414,6 @@ static void configure_mca(void) static unsigned ehci_debug_addr; #endif
-/* - * Initialize any extra cores/threads in this package. - */ -static void intel_cores_init(device_t cpu) -{ - struct cpuid_result result; - unsigned cores, threads, i; - - result = cpuid_ext(0xb, 0); /* Threads per core */ - threads = result.ebx & 0xff; - - result = cpuid_ext(0xb, 1); /* Cores per package */ - cores = result.ebx & 0xff; - - /* Only initialize extra cores from BSP */ - if (cpu->path.apic.apic_id) - return; - - printk(BIOS_DEBUG, "CPU: %u has %u cores %u threads\n", - cpu->path.apic.apic_id, cores, threads); - - for (i = 1; i < cores; ++i) { - struct device_path cpu_path; - device_t new; - - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = - cpu->path.apic.apic_id + i; - - /* Update APIC ID if no hyperthreading */ - if (threads == 1) - cpu_path.apic.apic_id <<= 1; - - /* Allocate the new cpu device structure */ - new = alloc_dev(cpu->bus, &cpu_path); - if (!new) - continue; - - printk(BIOS_DEBUG, "CPU: %u has core %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - - /* Start the new cpu */ - if (!start_cpu(new)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU %u would not start!\n", - new->path.apic.apic_id); - } - } -} - static void model_206ax_init(device_t cpu) { char processor_name[49]; @@ -528,9 +476,6 @@ static void model_206ax_init(device_t cpu)
/* Enable Turbo */ enable_turbo(); - - /* Start up extra cores */ - intel_cores_init(cpu); }
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c index 1c8c72b..a0afd2e 100644 --- a/src/cpu/intel/model_6ex/model_6ex_init.c +++ b/src/cpu/intel/model_6ex/model_6ex_init.c @@ -205,9 +205,6 @@ static void model_6ex_init(device_t cpu)
/* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c index 106719e..c5d7a6b 100644 --- a/src/cpu/intel/model_6fx/model_6fx_init.c +++ b/src/cpu/intel/model_6fx/model_6fx_init.c @@ -243,9 +243,6 @@ static void model_6fx_init(device_t cpu)
/* PIC thermal sensor control */ configure_pic_thermal_sensors(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); }
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c index ec78672..51b72a3 100644 --- a/src/cpu/intel/model_f2x/model_f2x_init.c +++ b/src/cpu/intel/model_f2x/model_f2x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h>
/* 512KB cache */ @@ -56,9 +55,6 @@ static void model_f2x_init(device_t cpu)
/* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); };
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c index 580c98b..ca346da 100644 --- a/src/cpu/intel/model_f3x/model_f3x_init.c +++ b/src/cpu/intel/model_f3x/model_f3x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h>
static uint32_t microcode_updates[] = { @@ -39,9 +38,6 @@ static void model_f3x_init(device_t cpu)
/* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); };
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c index 54edf2e..c857cef 100644 --- a/src/cpu/intel/model_f4x/model_f4x_init.c +++ b/src/cpu/intel/model_f4x/model_f4x_init.c @@ -7,7 +7,6 @@ #include <cpu/x86/msr.h> #include <cpu/x86/lapic.h> #include <cpu/intel/microcode.h> -#include <cpu/intel/hyperthreading.h> #include <cpu/x86/cache.h>
static uint32_t microcode_updates[] = { @@ -47,9 +46,6 @@ static void model_f4x_init(device_t cpu)
/* Enable the local cpu apics */ setup_lapic(); - - /* Start up my cpu siblings */ - intel_sibling_init(cpu); };
static struct device_operations cpu_dev_ops = { diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index e491d46..3c0f5a2 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -66,31 +66,28 @@ static void copy_secondary_start_to_1m_below(void) printk(BIOS_DEBUG, "start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); }
-static int lapic_start_cpu(unsigned long apicid) +static struct bus *current_cpu_bus; + +static int lapic_start_cpus(struct bus *cpu_bus) { int timeout; unsigned long send_status, accept_status, start_eip; - int j, num_starts, maxlvt; + int maxlvt;
/* * Starting actual IPI sequence... */
- printk(BIOS_SPEW, "Asserting INIT.\n"); - - /* - * Turn INIT on target chip - */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + current_cpu_bus = cpu_bus;
- /* - * Send IPI - */ + printk(BIOS_SPEW, "Asserting INIT.\n");
- lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT - | LAPIC_DM_INIT); + /* Send INIT SIPI to target chip */ + lapic_write_around(LAPIC_ICR2, 0); + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT + | LAPIC_DM_INIT | LAPIC_DEST_ALLBUT);
- printk(BIOS_SPEW, "Waiting for send to finish...\n"); + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { printk(BIOS_SPEW, "+"); @@ -98,108 +95,67 @@ static int lapic_start_cpu(unsigned long apicid) send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: First apic write timed out. Disabling\n", - apicid); + printk(BIOS_DEBUG, "First apic write timed out. Disabling\n"); // too bad. - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); if (lapic_read(LAPIC_ESR)) { - printk(BIOS_ERR, "Try to reset ESR\n"); + printk(BIOS_DEBUG, "Try to reset ESR\n"); lapic_write_around(LAPIC_ESR, 0); - printk(BIOS_ERR, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); + printk(BIOS_DEBUG, "ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); } return 0; } -#if !CONFIG_CPU_AMD_MODEL_10XXX && !CONFIG_CPU_INTEL_MODEL_206AX - mdelay(10); -#endif + start_eip = get_valid_start_eip((unsigned long)_secondary_start);
- printk(BIOS_SPEW, "Deasserting INIT.\n"); + maxlvt = 4; + + printk(BIOS_SPEW, "Sending STARTUP.\n"); + lapic_read_around(LAPIC_SPIV); + lapic_write(LAPIC_ESR, 0); + lapic_read(LAPIC_ESR); + printk(BIOS_SPEW, "After apic_write.\n"); + + /* + * STARTUP IPI + */
/* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); + lapic_write_around(LAPIC_ICR2, 0);
- /* Send IPI */ - lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); + /* Boot on the stack */ + /* Kick the second */ + lapic_write_around(LAPIC_ICR, LAPIC_INT_ASSERT | LAPIC_DM_STARTUP | LAPIC_DEST_ALLBUT + | (start_eip >> 12));
- printk(BIOS_SPEW, "Waiting for send to finish...\n"); + /* + * Give the other CPU some time to accept the IPI. + */ + udelay(300); + + printk(BIOS_DEBUG, "Startup point 1.\n"); + + printk(BIOS_DEBUG, "Waiting for send to finish...\n"); timeout = 0; do { - printk(BIOS_SPEW, "+"); + printk(BIOS_DEBUG, "+"); udelay(100); send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; } while (send_status && (timeout++ < 1000)); - if (timeout >= 1000) { - printk(BIOS_ERR, "CPU %ld: Second apic write timed out. Disabling\n", - apicid); - // too bad. - return 0; - } - - start_eip = get_valid_start_eip((unsigned long)_secondary_start); - -#if !CONFIG_CPU_AMD_MODEL_10XXX - num_starts = 2; -#else - num_starts = 1; -#endif
/* - * Run STARTUP IPI loop. + * Give the other CPU some time to accept the IPI. */ - printk(BIOS_SPEW, "#startup loops: %d.\n", num_starts); - - maxlvt = 4; - - for (j = 1; j <= num_starts; j++) { - printk(BIOS_SPEW, "Sending STARTUP #%d to %lu.\n", j, apicid); + udelay(200); + /* + * Due to the Pentium erratum 3AP. + */ + if (maxlvt > 3) { lapic_read_around(LAPIC_SPIV); lapic_write(LAPIC_ESR, 0); - lapic_read(LAPIC_ESR); - printk(BIOS_SPEW, "After apic_write.\n"); - - /* - * STARTUP IPI - */ - - /* Target chip */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(apicid)); - - /* Boot on the stack */ - /* Kick the second */ - lapic_write_around(LAPIC_ICR, LAPIC_DM_STARTUP - | (start_eip >> 12)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(300); - - printk(BIOS_SPEW, "Startup point 1.\n"); - - printk(BIOS_SPEW, "Waiting for send to finish...\n"); - timeout = 0; - do { - printk(BIOS_SPEW, "+"); - udelay(100); - send_status = lapic_read(LAPIC_ICR) & LAPIC_ICR_BUSY; - } while (send_status && (timeout++ < 1000)); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - /* - * Due to the Pentium erratum 3AP. - */ - if (maxlvt > 3) { - lapic_read_around(LAPIC_SPIV); - lapic_write(LAPIC_ESR, 0); - } - accept_status = (lapic_read(LAPIC_ESR) & 0xEF); - if (send_status || accept_status) - break; } - printk(BIOS_SPEW, "After Startup.\n"); + accept_status = (lapic_read(LAPIC_ESR) & 0xEF); + + printk(BIOS_DEBUG, "After Startup.\n"); if (send_status) printk(BIOS_WARNING, "APIC never delivered???\n"); if (accept_status) @@ -209,73 +165,12 @@ static int lapic_start_cpu(unsigned long apicid) return 1; }
+ /* Number of cpus that are currently running in coreboot */ static atomic_t active_cpus = ATOMIC_INIT(1);
-/* start_cpu_lock covers last_cpu_index and secondary_stack. - * Only starting one cpu at a time let's me remove the logic - * for select the stack from assembly language. - * - * In addition communicating by variables to the cpu I - * am starting allows me to veryify it has started before - * start_cpu returns. - */ - -static spinlock_t start_cpu_lock = SPIN_LOCK_UNLOCKED; -static unsigned last_cpu_index = 0; volatile unsigned long secondary_stack; - -int start_cpu(device_t cpu) -{ - extern unsigned char _estack[]; - struct cpu_info *info; - unsigned long stack_end; - unsigned long apicid; - unsigned long index; - unsigned long count; - int result; - - spin_lock(&start_cpu_lock); - - /* Get the cpu's apicid */ - apicid = cpu->path.apic.apic_id; - - /* Get an index for the new processor */ - index = ++last_cpu_index; - - /* Find end of the new processors stack */ - stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info); - - /* Record the index and which cpu structure we are using */ - info = (struct cpu_info *)stack_end; - info->index = index; - info->cpu = cpu; - - /* Advertise the new stack to start_cpu */ - secondary_stack = stack_end; - - /* Until the cpu starts up report the cpu is not enabled */ - cpu->enabled = 0; - cpu->initialized = 0; - - /* Start the cpu */ - result = lapic_start_cpu(apicid); - - if (result) { - result = 0; - /* Wait 1s or until the new cpu calls in */ - for(count = 0; count < 100000 ; count++) { - if (secondary_stack == 0) { - result = 1; - break; - } - udelay(10); - } - } - secondary_stack = 0; - spin_unlock(&start_cpu_lock); - return result; -} +extern unsigned char _estack[];
#if CONFIG_AP_IN_SIPI_WAIT
@@ -383,64 +278,19 @@ static __inline__ __attribute__((always_inline)) void writecr4(unsigned long Dat /* C entry point of secondary cpus */ void secondary_cpu_init(void) { - atomic_inc(&active_cpus); -#if CONFIG_SERIAL_CPU_INIT - spin_lock(&start_cpu_lock); -#endif - #ifdef __SSE3__ - /* - * Seems that CR4 was cleared when AP start via lapic_start_cpu() - * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled - */ - u32 cr4_val; - cr4_val = readcr4(); - cr4_val |= (1 << 9 | 1 << 10); - writecr4(cr4_val); + /* + * Seems that CR4 was cleared when AP start via lapic_start_cpu() + * Turn on CR4.OSFXSR and CR4.OSXMMEXCPT when SSE options enabled + */ + u32 cr4_val; + cr4_val = readcr4(); + cr4_val |= (1 << 9 | 1 << 10); + writecr4(cr4_val); #endif - cpu_initialize(); -#if CONFIG_SERIAL_CPU_INIT - spin_unlock(&start_cpu_lock); -#endif - + atomic_inc(&active_cpus); + cpu_initialize(current_cpu_bus); atomic_dec(&active_cpus); - - stop_this_cpu(); -} - -static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) -{ - device_t cpu; - /* Loop through the cpus once getting them started */ - - for(cpu = cpu_bus->children; cpu ; cpu = cpu->sibling) { - if (cpu->path.type != DEVICE_PATH_APIC) { - continue; - } - #if !CONFIG_SERIAL_CPU_INIT - if(cpu==bsp_cpu) { - continue; - } - #endif - - if (!cpu->enabled) { - continue; - } - - if (cpu->initialized) { - continue; - } - - if (!start_cpu(cpu)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU 0x%02x would not start!\n", - cpu->path.apic.apic_id); - } -#if CONFIG_SERIAL_CPU_INIT - udelay(10); -#endif - } - }
static void wait_other_cpus_stop(struct bus *cpu_bus) @@ -481,10 +331,6 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) void initialize_cpus(struct bus *cpu_bus) { struct device_path cpu_path; - struct cpu_info *info; - - /* Find the info struct for this cpu */ - info = cpu_info();
#if NEED_LAPIC == 1 /* Ensure the local apic is enabled */ @@ -499,9 +345,6 @@ void initialize_cpus(struct bus *cpu_bus) cpu_path.cpu.id = 0; #endif
- /* Find the device structure for the boot cpu */ - info->cpu = alloc_find_dev(cpu_bus, &cpu_path); - #if CONFIG_SMP copy_secondary_start_to_1m_below(); // why here? In case some day we can start core1 in amd_sibling_init #endif @@ -512,21 +355,11 @@ void initialize_cpus(struct bus *cpu_bus)
cpus_ready_for_init();
-#if CONFIG_SMP - #if !CONFIG_SERIAL_CPU_INIT - /* start all aps at first, so we can init ECC all together */ - start_other_cpus(cpu_bus, info->cpu); - #endif -#endif - /* Initialize the bootstrap processor */ - cpu_initialize(); + cpu_initialize(cpu_bus);
#if CONFIG_SMP - #if CONFIG_SERIAL_CPU_INIT - start_other_cpus(cpu_bus, info->cpu); - #endif - + lapic_start_cpus(cpu_bus); /* Now wait the rest of the cpus stop*/ wait_other_cpus_stop(cpu_bus); #endif diff --git a/src/cpu/x86/lapic/secondary.S b/src/cpu/x86/lapic/secondary.S index dc00b08..afffbd3 100644 --- a/src/cpu/x86/lapic/secondary.S +++ b/src/cpu/x86/lapic/secondary.S @@ -38,10 +38,19 @@ _secondary_start: /* Load the Interrupt descriptor table */ lidt idtarg
- /* Set the stack pointer, and flag that we are done */ - xorl %eax, %eax - movl secondary_stack, %esp - movl %eax, secondary_stack +cpu: + .long 0 + + /* increment our cpu index */ + movl $1, %eax + lock xadd %eax, cpu + incl %eax + + /* assign stack for this specific cpu */ + mov _stack, %esp + mov $CONFIG_STACK_SIZE, %ebx + mul %ebx + add %eax, %esp
call secondary_cpu_init 1: hlt diff --git a/src/cpu/x86/pae/pgtbl.c b/src/cpu/x86/pae/pgtbl.c index 814c5f1..cc19aae 100644 --- a/src/cpu/x86/pae/pgtbl.c +++ b/src/cpu/x86/pae/pgtbl.c @@ -5,6 +5,7 @@ #include <console/console.h> #include <cpu/cpu.h> #include <cpu/x86/pae.h> +#include <cpu/x86/lapic.h> #include <string.h>
static void paging_off(void) @@ -60,7 +61,7 @@ void *map_2M_page(unsigned long page) unsigned long window; void *result; int i; - index = cpu_index(); + index = lapicid(); if ((index < 0) || (index >= CONFIG_MAX_CPUS)) { return MAPPING_ERROR; } diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c index 392471a..12be4da 100644 --- a/src/drivers/i2c/w83795/w83795.c +++ b/src/drivers/i2c/w83795/w83795.c @@ -22,6 +22,7 @@ #include <console/console.h> #include <device/device.h> #include "southbridge/amd/cimx/sb700/smbus.h" /*SMBUS_IO_BASE*/ +#include <cpu/x86/lapic.h> #include "w83795.h"
static u32 w83795_set_bank(u8 bank) @@ -224,10 +225,8 @@ static void w83795_init(w83795_fan_mode_t mode, u8 dts_src) static void w83795_hwm_init(device_t dev) { struct device *cpu; - struct cpu_info *info;
- info = cpu_info(); - cpu = info->cpu; + cpu = dev_find_lapic(lapicid()); if (!cpu) die("CPU: missing cpu device structure");
diff --git a/src/include/cpu/cpu.h b/src/include/cpu/cpu.h index c2113c1..1dc5a58 100644 --- a/src/include/cpu/cpu.h +++ b/src/include/cpu/cpu.h @@ -4,7 +4,7 @@ #include <arch/cpu.h>
#if !defined(__ROMCC__) -void cpu_initialize(void); +void cpu_initialize(struct bus *cpu_bus); struct bus; void initialize_cpus(struct bus *cpu_bus); void secondary_cpu_init(void);