[LinuxBIOS] Re: dead loop in compute_allocate_resource

[yhlu]

I enable enable com1 get it through. ....

YH

PCI: 00:1f.2 20 *  [0x000030a0 - 0x000030af] io
        1: PNP: 002e.2 60 *  [0x000003f8 - 0x000003ff] io
        1: PCI: 00:1f.2 10 *  [0x000030b0 - 0x000030b7] io
        2: PCI: 00:1f.2 10 *  [0x000030b0 - 0x000030b7] io

On 7/5/05, Steve Magnani  wrote:
> Might be the keyboard or floppy, too - I turned those off as well.
>
> Steve
> -----Original Message-----
> From: "Steve Magnani" 
> To: [e-mail], [e-mail], [e-mail]
> Date: Tue, 05 Jul 2005 18:04:38 -0500
> Subject: Re: dead loop in compute_allocate_resource
> > I ran into something similar over the weekend, with a s2735 variant
> > (Intel
> > 7501 Xeon development kit) I'm working on. I had assumed it was
> > something
> > I did wrong in Config.lb - I set the USB and IDE devices "on" even
> > though
> > my southbridge LPC setup disables them. When I set the USB and IDE
> > devices
> > "off" in Config.lb my problem went away. Not a solution, I know, but it
> > might help track down the problem.
> >
> > Steve