My understanding is that your coreboot does not have ACPI table, you possible 1) add ACPI support in coreboot, or 2) modify UEFI payload to remove the assert if ACPI table not exist, or 3) trying the latest coreboot package from edk2 source tree.
On Tue, Jul 7, 2015 at 2:58 AM, DM365 1395158558@qq.com wrote:
Hello! I tested intel uefi payload instead of seabios in coreboot minnowboard max . It failed with "Failed to find the required acpi table ". If I use seabios payload ,the bios runs ok! I followed "http://www.elinux.org/Minnowboard:MinnowMaxCoreboot" to build coreboot. I used "https://firmware.intel.com/develop/" 2014-WW26-UEFI.coreboot.Payload.zip https://firmware.intel.com/sites/default/files/2014-WW26-UEFI.CoreBoot.Payload.zip to builed uefi in coreboot. https://firmware.intel.com/sites/default/files/2014-WW26-UEFI.CoreBoot.Payload.zip The whole terminal log is : POST: 0x4a POST: 0x4b POST: 0x4c POST: 0x4d POST: 0x4e POST: 0x4f POST: 0x39 POST: 0x80 POST: 0x70 POST: 0x71 POST: 0x72 POST: 0x24 POST: 0x25 POST: 0x24 POST: 0x25 POST: 0x55 POST: 0x24 POST: 0x25 POST: 0x55 POST: 0x55 POST: 0x73 APIC: 00 missing read_resources PCI: 00:00.0 missing set_resources POST: 0x74 POST: 0x75 POST: 0x75 POST: 0x93 POST: 0x9b POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 POST: 0x75 Warning: PCI Device 2 does not have an IRQ entry, skipping it POST: 0x75 POST: 0x75 POST: 0x76 POST: 0x77 find_current_mrc_cache_local: No valid fast boot cache found. POST: 0x79 POST: 0x9c POST: 0x9e POST: 0x9d POST: 0x7a POST: 0x7b POST: 0xf8 PROGRESS CODE: V03020003 I0 Loading PEIM at 0x0000080EC20 EntryPoint=0x0000080EE80 CbSupportPeim.efi PROGRESS CODE: V03020002 I0 0. 0000000000000000 - 0000000000000FFF [10]
- 0000000000001000 - 000000000009FFFF [01]
- 00000000000A0000 - 00000000000FFFFF [02]
- 0000000000100000 - 000000007ACBCFFF [01]
- 000000007ACBD000 - 000000007ADFFFFF [10]
- 000000007AE00000 - 000000007FFFFFFF [02]
- 00000000E0000000 - 00000000EFFFFFFF [02]
- 00000000FEB00000 - 00000000FEC00FFF [02]
- 00000000FED01000 - 00000000FED01FFF [02]
- 00000000FED03000 - 00000000FED03FFF [02]
- 00000000FED05000 - 00000000FED05FFF [02]
- 00000000FED08000 - 00000000FED08FFF [02]
- 00000000FED0C000 - 00000000FED0FFFF [02]
- 00000000FED1C000 - 00000000FED1CFFF [02]
- 00000000FEE00000 - 00000000FEE00FFF [02]
- 00000000FEF00000 - 00000000FEFFFFFF [02]
- 00000000FF800000 - 00000000FFFFFFFF [02]
Low memory 0x7ACBD000, High Memory 0x0 LowMemorySize: 0x7ACBD000. HighMemorySize: 0x0. PeiMemBase: 0x76CB0000. PeiMemSize: 0x4000000. PeiInstallPeiMemory MemoryBegin 0x76CB0000, MemoryLength 0x4000000 Found one valid fv : 0x820000. Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39 Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry point: 801BC0 The 1th FV start address is 0x00000820000, size is 0x003E0000, handle is 0x820000 Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410 Actual Coreboot header: 0x7ACBD000. Failed to find the required acpi table
PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c (338): ((BOOLEAN)(0==1))
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot