minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

[DM365]

Hello!
      I tested intel uefi payload instead of seabios in coreboot minnowboard max .
      It failed with "Failed to find the required acpi table ".
      If I use seabios payload ,the bios runs ok!
      I followed "http://www.elinux.org/Minnowboard:MinnowMaxCoreboot" to build coreboot.
      I used "https://firmware.intel.com/develop/" 2014-WW26-UEFI.coreboot.Payload.zip to builed uefi in coreboot.
      The whole terminal log is :
   POST: 0x4a
POST: 0x4b
POST: 0x4c
POST: 0x4d
POST: 0x4e
POST: 0x4f
POST: 0x39
POST: 0x80
POST: 0x70
POST: 0x71
POST: 0x72
POST: 0x24
POST: 0x25
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x24
POST: 0x25
POST: 0x55
POST: 0x55
POST: 0x73
APIC: 00 missing read_resources
PCI: 00:00.0 missing set_resources
POST: 0x74
POST: 0x75
POST: 0x75
POST: 0x93
POST: 0x9b
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
POST: 0x75
Warning: PCI Device 2 does not have an IRQ entry, skipping it
POST: 0x75
POST: 0x75
POST: 0x76
POST: 0x77
find_current_mrc_cache_local: No valid fast boot cache found.
POST: 0x79
POST: 0x9c
POST: 0x9e
POST: 0x9d
POST: 0x7a
POST: 0x7b
POST: 0xf8
PROGRESS CODE: V03020003 I0
Loading PEIM at 0x0000080EC20 EntryPoint=0x0000080EE80 CbSupportPeim.efi
PROGRESS CODE: V03020002 I0
0. 0000000000000000 - 0000000000000FFF [10]
1. 0000000000001000 - 000000000009FFFF [01]
2. 00000000000A0000 - 00000000000FFFFF [02]
3. 0000000000100000 - 000000007ACBCFFF [01]
4. 000000007ACBD000 - 000000007ADFFFFF [10]
5. 000000007AE00000 - 000000007FFFFFFF [02]
6. 00000000E0000000 - 00000000EFFFFFFF [02]
7. 00000000FEB00000 - 00000000FEC00FFF [02]
8. 00000000FED01000 - 00000000FED01FFF [02]
9. 00000000FED03000 - 00000000FED03FFF [02]
10. 00000000FED05000 - 00000000FED05FFF [02]
11. 00000000FED08000 - 00000000FED08FFF [02]
12. 00000000FED0C000 - 00000000FED0FFFF [02]
13. 00000000FED1C000 - 00000000FED1CFFF [02]
14. 00000000FEE00000 - 00000000FEE00FFF [02]
15. 00000000FEF00000 - 00000000FEFFFFFF [02]
16. 00000000FF800000 - 00000000FFFFFFFF [02]
Low memory 0x7ACBD000, High Memory 0x0
LowMemorySize: 0x7ACBD000.
HighMemorySize: 0x0.
PeiMemBase: 0x76CB0000.
PeiMemSize: 0x4000000.
PeiInstallPeiMemory MemoryBegin 0x76CB0000, MemoryLength 0x4000000
Found one valid fv : 0x820000.
Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry point: 801BC0
The 1th FV start address is 0x00000820000, size is 0x003E0000, handle is 0x820000
Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410
Actual Coreboot header: 0x7ACBD000.
Failed to find the required acpi table

PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c (338): ((BOOLEAN)(0==1))

minnowboardmax coreboot intel uefi payload :Failed to find the required acpi table

[WANG FEI]

My understanding is that your coreboot does not have ACPI table, you
possible 1) add ACPI support in coreboot, or 2) modify UEFI payload to
remove the assert if ACPI table not exist, or 3) trying the latest coreboot
package from edk2 source tree.

On Tue, Jul 7, 2015 at 2:58 AM, DM365  wrote:
> Hello!
>       I tested intel uefi payload instead of seabios in coreboot
> minnowboard max .
>       It failed with "Failed to find the required acpi table ".
>       If I use seabios payload ,the bios runs ok!
>       I followed "http://www.elinux.org/Minnowboard:MinnowMaxCoreboot" to
> build coreboot.
>       I used "https://firmware.intel.com/develop/"
> 2014-WW26-UEFI.coreboot.Payload.zip
> https://firmware.intel.com/sites/default/files/2014-WW26-UEFI.CoreBoot.Payload.zip to
> builed uefi in coreboot.
> https://firmware.intel.com/sites/default/files/2014-WW26-UEFI.CoreBoot.Payload.zip
>       The whole terminal log is :
>    POST: 0x4a
> POST: 0x4b
> POST: 0x4c
> POST: 0x4d
> POST: 0x4e
> POST: 0x4f
> POST: 0x39
> POST: 0x80
> POST: 0x70
> POST: 0x71
> POST: 0x72
> POST: 0x24
> POST: 0x25
> POST: 0x24
> POST: 0x25
> POST: 0x55
> POST: 0x24
> POST: 0x25
> POST: 0x55
> POST: 0x55
> POST: 0x73
> APIC: 00 missing read_resources
> PCI: 00:00.0 missing set_resources
> POST: 0x74
> POST: 0x75
> POST: 0x75
> POST: 0x93
> POST: 0x9b
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> POST: 0x75
> Warning: PCI Device 2 does not have an IRQ entry, skipping it
> POST: 0x75
> POST: 0x75
> POST: 0x76
> POST: 0x77
> find_current_mrc_cache_local: No valid fast boot cache found.
> POST: 0x79
> POST: 0x9c
> POST: 0x9e
> POST: 0x9d
> POST: 0x7a
> POST: 0x7b
> POST: 0xf8
> PROGRESS CODE: V03020003 I0
> Loading PEIM at 0x0000080EC20 EntryPoint=0x0000080EE80 CbSupportPeim.efi
> PROGRESS CODE: V03020002 I0
> 0. 0000000000000000 - 0000000000000FFF [10]
> 0000000000001000 - 000000000009FFFF [01]
> 00000000000A0000 - 00000000000FFFFF [02]
> 0000000000100000 - 000000007ACBCFFF [01]
> 000000007ACBD000 - 000000007ADFFFFF [10]
> 000000007AE00000 - 000000007FFFFFFF [02]
> 00000000E0000000 - 00000000EFFFFFFF [02]
> 00000000FEB00000 - 00000000FEC00FFF [02]
> 00000000FED01000 - 00000000FED01FFF [02]
> 00000000FED03000 - 00000000FED03FFF [02]
> 00000000FED05000 - 00000000FED05FFF [02]
> 00000000FED08000 - 00000000FED08FFF [02]
> 00000000FED0C000 - 00000000FED0FFFF [02]
> 00000000FED1C000 - 00000000FED1CFFF [02]
> 00000000FEE00000 - 00000000FEE00FFF [02]
> 00000000FEF00000 - 00000000FEFFFFFF [02]
> 00000000FF800000 - 00000000FFFFFFFF [02]
>
> Low memory 0x7ACBD000, High Memory 0x0
> LowMemorySize: 0x7ACBD000.
> HighMemorySize: 0x0.
> PeiMemBase: 0x76CB0000.
> PeiMemSize: 0x4000000.
> PeiInstallPeiMemory MemoryBegin 0x76CB0000, MemoryLength 0x4000000
> Found one valid fv : 0x820000.
> Install PPI: 49EDB1C1-BF21-4761-BB12-EB0031AABB39
> Notify: PPI Guid: 49EDB1C1-BF21-4761-BB12-EB0031AABB39, Peim notify entry
> point: 801BC0
> The 1th FV start address is 0x00000820000, size is 0x003E0000, handle is
> 0x820000
> Install PPI: 7408D748-FC8C-4EE6-9288-C4BEC092A410
> Actual Coreboot header: 0x7ACBD000.
> Failed to find the required acpi table
>
> PEI_ASSERT!: d:\myworkspace\CorebootModulePkg\CbSupportPei\CbSupportPei.c
> (338): ((BOOLEAN)(0==1))