Re: PIRQ problems on Geode GX1 board.

[Stefan Reinauer]

* Joey Nelson  [030410 03:10]:
> I ran getpir on the target with its standard bios, and got a good
> irq_tables.c, and HAVE_PIRQ_TABLE=1 is set in the Config.

Please check whether the PIRQ table is really ok. I dumped a 
"good" pirq table from my geode box, but unfortunately, it was
for the wrong chipset (gx5520 instead of 5530)
In the Supertek ST-3WT target i fixed this by setting interrupts
manually to the mapping on that board. I guess this is what the
award bios on there did before instead of using the wrong pirq table.

Stefan