Hi. I'm extending the m5 simulator (www.m5sim.org) to support x86_64 and am trying to figure out exactly how the boot process should work. According to both the AMD and Intel manuals, the cpu resets with the CS base at 0xFFFF0000, the CS selector at 0xF000, and the IP at 0xFFF0 which means that the first instruction is fetched from physical memory address 0xFFFFFFF0. In all the other references I've found, however, the BIOS reset vector is described as being at 0xFFFF0. I used a hexeditor on a few BIOS images, and it seems that the first instruction at that reset vector is doing a far jump to CS selector 0xF000. This would keep the CS selector the same, but it would cause the CS base to be overwritten and instruction fetching to occur in the lower regions of memory. I'm assuming that the BIOS ROM is mapped into memory at both the top and bottom of the 32 bit address space, but there are very little information of this upper mapping. Could someone please explain to me how this is supposed to work? I need to know in enough detail to be able to implement it myself, but I also don't want to be too specific and limit the systems that I can simulate.
Gabe Black